If it doesn't work with the 2.6 kernel, that's too bad... And XFree86
4.40 doesn't seem to support that video card. So perhaps you should try
the vesa driver:
Driver "vesa"
-Mark
On Wed, 21 Apr 2004, Jennifer Stickel wrote:
> I tried that driver and it doesn't work with the 2.6 kernel, so I am
> using the one that came with X.
>
> I think part of the problem may be that it isn't seeing that it has
> enough memory. I edited the line in the XF86config file to say that it
> has 64MB of video RAM, but using kinfocenter it only thinks that I have
> 4MB of video RAM.
>
> Jennifer
>
>
> Mark K. Kim wrote:
>
> >You can add all modes, in the order of your preference, like this:
> >
> > Modes "1024x768" "800x600" "640x480"
> >
> >so you don't have to try each one.
> >
> >Anyway, that's the sidenote. Since you got the sync information, set the
> >hsync and vsync rates in XF86Config:
> >
> > HorizSync 30-100
> > VertRefresh 50-160
> >
> >Furthermore, your video card needs to be supported by X. It looks like
> >Intel has their own driver and a support page:
> >
> > http://support.intel.com/support/graphics/linux/graphics.htm
> >
> >Neat.
> >
> >-Mark
> >
> >
> >On Wed, 21 Apr 2004, Jennifer Stickel wrote:
> >
> >
> >
> >>I found the /etc/X11/XF86Config file and edited a few times. Here is
> >>the most recent one that I tried:
> >>
> >>Section "Screen"
> >>
> >> Identifier "Screen0"
> >> Device "VideoCard0"
> >> Monitor "Monitor0"
> >> DefaultDepth 16
> >> SubSection "Display"
> >> Depth 16
> >> Modes "1024x768"
> >> EndSubsection
> >> SubSection "Display"
> >> Depth 24
> >> Modes "1024x768"
> >> EndSubSection
> >>EndSection
> >>
> >>When I restart X, I don't get any errors but the screen is still the
> >>same size.
> >>
> >>Is there a tool I can use to figure out the amount of video RAM or do I
> >>have to look for manuals that might list that?
> >>Thanks for all the help,
> >>
> >>Jennifer
> >>
> >>Jonathan McPherson wrote:
> >>
> >>
> >>
> >>>Jennifer,
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>>Yes it is an LCD monitor. I tried running xvidtune and got the message
> >>>>"Video are not settable on this chip". If I check the control center,
> >>>>it says that the screen size is 640x480 and has no other options for
> >>>>it. How else can I up the resolution?
> >>>>
> >>>>
> >>>>
> >>>>
> >>>The first thing I would try is to follow the other poster's suggestion
> >>>and manually edit the configuration file.
> >>>
> >>>However, if that doesn't work, you may be running into the same problem I
> >>>have had with my LCD monitor: XFree believes that you can't support a
> >>>higher resolution because it doesn't have the right specs on your monitor
> >>>and video card.
> >>>
> >>>You need to tell xfree that your monitor has a very high range of
> >>>horizontal and vertical synch frequencies, and that your video card has
> >>>at least as much video RAM as it actually does. XFree will not allow you
> >>>to change to a resolution that it (a) doesn't think your monitor can
> >>>handle or (b) doesn't think you have the video memory to maintain.
> >>>
> >>>You can do this in the configuration file mentioned by the other
> >>>poster--the places on the file that you need to make the changes
> >>>should be obvious.
> >>>
> >>>-jam
> >>>_______________________________________________
> >>>vox-tech mailing list
> >>>[EMAIL PROTECTED]
> >>>http://lists.lugod.org/mailman/listinfo/vox-tech
> >>>
> >>>
> >>>
> >>>
> >>>
> >>_______________________________________________
> >>vox-tech mailing list
> >>[EMAIL PROTECTED]
> >>http://lists.lugod.org/mailman/listinfo/vox-tech
> >>
> >>
> >>
> >
> >
> >
> _______________________________________________
> vox-tech mailing list
> [EMAIL PROTECTED]
> http://lists.lugod.org/mailman/listinfo/vox-tech
>
--
Mark K. Kim
AIM: markus kimius
Homepage: http://www.cbreak.org/
Xanga: http://www.xanga.com/vindaci
Friendster: http://www.friendster.com/user.jsp?id=13046
PGP key fingerprint: 7324 BACA 53AD E504 A76E 5167 6822 94F0 F298 5DCE
PGP key available on the homepage
_______________________________________________
vox-tech mailing list
[EMAIL PROTECTED]
http://lists.lugod.org/mailman/listinfo/vox-tech
