Thanks for the correction Rick. My Bad. A big typo on my part. 'insmod 3c59x' produced a 'No such device' error. The card says Etherlink III on it and I took it to be a 3com, but dmesg lists the device as 'ADMtek Comet rev 17'. The driver is apparently 'tulip' and was loaded dynamically. Nonetheless, I'm still having the same problems.
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Rick Moen > Sent: Wednesday, March 02, 2005 10:57 AM > To: [email protected] > Subject: Re: [vox-tech] Another Round of eth0 Problemas > > > Quoting Karalius, Joseph ([EMAIL PROTECTED]): > > > OK. I installed a working NIC from another box (it is a 10/100 so I > > insmodded 3c509 to get it going)... > ^^^^^ > > This may have been just a typo on your part, but I frequently > see confusion > between two classes of 3Com cards: > > 3C509 family: ISA (long discontinued, but very good in its > day), 10 Mbps only > 3C905 family: PCI, 10/100 Mbps > > -- > Cheers, Hardware: The > part you kick. > Rick Moen Software: The > part you boot. > [EMAIL PROTECTED] > _______________________________________________ > vox-tech mailing list > [email protected] > http://lists.lugod.org/mailman/listinfo/vox-tech > _______________________________________________ vox-tech mailing list [email protected] http://lists.lugod.org/mailman/listinfo/vox-tech
