> I am pleased to announce that Voyage Linux 0.2pre1 is now available at the > below location: > > http://www.voyage.hk/download/voyage/voyage-0.2pre1.tar.gz > > README > http://cvs.voyage.hk/cgi-bin/viewcvs.cgi/voyage-install/README?rev=1.10
thanks for that version punky, I tested it on my wraps... an found the following in the readme (these lines are from me :) > 3.10 Hardware Sensors > ====================== > > First, "apt-get install lm-sensors" > > To read temperature reading in WRAP board, you will need to add the following > modules in /etc/modules: > scx200_acb > i2c-sensor > lm77 the apt-get install lm-sensors will install all the perl stuff (26MB!!!). I checked something and finally You doesnt need any sensors-stuff. Just modprobe the modules and you can read the temps from te /sys filesystem. Next days i will try, if snmpd can show these temps... regards _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
