Could you please provide us a sample script/command on how to read and
interprete the actual temps from /sys?
Thanks, Mirko
Matthias Lemke wrote:
I am pleased to announce that Voyage Linux 0.2pre1 is now available at the
below location:
http://www.voyage.hk/download/voyage/voyage-0.2pre1.tar.gz
README
http://cvs.voyage.hk/cgi-bin/viewcvs.cgi/voyage-install/README?rev=1.10
thanks for that version punky,
I tested it on my wraps... an found the following in the readme (these
lines are from me :)
3.10 Hardware Sensors
======================
First, "apt-get install lm-sensors"
To read temperature reading in WRAP board, you will need to add the
following
modules in /etc/modules:
scx200_acb
i2c-sensor
lm77
the apt-get install lm-sensors will install all the perl stuff (26MB!!!).
I checked something and finally You doesnt need any sensors-stuff. Just
modprobe the modules and you can read the temps from te /sys filesystem.
Next days i will try, if snmpd can show these temps...
regards
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
