Hi Edwin, How can I reproduce it? And what version do you upgrade it from? From 0.1?
- Punky On 4/3/06, Edwin Whitelaw <[EMAIL PROTECTED]> wrote: > I've just unfortunately duplicated something that I thought was simply a > goof on my part but may be an apt-get/package problem. > > I've got my apt sources file set to us.voyage.hk for the unstable tree > so I could get the latest kernel and madwifi-ng stuff. Everything > upgrades fine when running > > apt-get dist-upgrade > > and the system then reboots to the new kernel fine. However, after > loading a few other things (that should really have nothing to do with > this problem) such as rsync and quagga, the unit fails on reboot. with > > INIT: Id "T0" respawning too fast: disabled for 5 minutes > INIT: no more processes left in this runlevel > INIT: Id "T0" respawning too fast: disabled for 5 minutes > . > . > . > etc. > > > I've made no changes to inittab from the initial load through the > upgrades. I do have the serial speed set to 38400 but that's never been > a problem until now. > > Any comments? How does one interrupt the boot on a WRAP to boot single > user, BTW? > > Below is the entire boot console output. Sorry about the extra data but > it might clue someone to what's happening. > > --------------console output------- > PC Engines WRAP.2B/2C v1.11 > 640 KB Base Memory > 15360317444812864512 KB Extended Memory > > 01F0 Master 848A Hitachi XX.V.3.7.0.0 > Phys C/H/S 695/15/48 Log C/H/S 695/15/48 > > LI > LILLOO 2222..66..11 LLooaaddiinngg > LLiinnuuxx................................ > .............. > > BBIIOOSS ddaattaa cchheecckk ssuucccceessssffuull > > Linux version 2.6.15-486-voyage (2.0-10) ([EMAIL PROTECTED]) (gcc version > 3.3.5 ( > Debian 1:3.3.5-13)) #1 PREEMPT Mon Mar 27 07:45:05 GMT 2006 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 0000000004000000 (usable) > BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) > 64MB LOWMEM available. > DMI not present. > Allocating PCI resources starting at 10000000 (gap: 04000000:fbf00000) > Built 1 zonelists > Kernel command line: auto BOOT_IMAGE=Linux ro root=301 console=ttyS0,38400n8 > No local APIC present or hardware disabled > Initializing CPU#0 > PID hash table entries: 512 (order: 9, 8192 bytes) > Detected 266.663 MHz processor. > Using tsc for high-res timesource > Console: colour dummy device 80x25 > Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) > Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) > Memory: 61868k/65536k available (1606k kernel code, 3276k reserved, 598k > data, 1 > 40k init, 0k highmem) > Checking if this processor honours the WP bit even in supervisor mode... Ok. > Calibrating delay using timer specific routine.. 534.32 BogoMIPS > (lpj=1068640) > Mount-cache hash table entries: 512 > CPU: NSC Unknown stepping 01 > Checking 'hlt' instruction... OK. > NET: Registered protocol family 16 > PCI: PCI BIOS revision 2.10 entry at 0xfc47b, last bus=0 > PCI: Using configuration type 1 > PCI: Probing PCI hardware > PCI: Device 0000:00:12.5 not found by BIOS > Initializing Cryptographic API > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered > i8042.c: No controller found. > Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled > ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > hda: Hitachi XX.V.3.7.0.0, CFA DISK drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > hda: max request size: 128KiB > hda: 500400 sectors (256 MB) w/1KiB Cache, CHS=695/15/48 > hda: cache flushes not supported > hda: hda1 > mice: PS/2 mouse device common for all mice > padlock: VIA PadLock not detected. > NET: Registered protocol family 2 > IP route cache hash table entries: 1024 (order: 0, 4096 bytes) > TCP established hash table entries: 4096 (order: 2, 16384 bytes) > TCP bind hash table entries: 4096 (order: 2, 16384 bytes) > TCP: Hash tables configured (established 4096 bind 4096) > TCP reno registered > TCP bic registered > NET: Registered protocol family 1 > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > IPv6 over IPv4 tunneling driver > NET: Registered protocol family 17 > NET: Registered protocol family 15 > Using IPI Shortcut mode > hda: hda1 > hda: hda1 > VFS: Mounted root (ext2 filesystem) readonly. > Freeing unused kernel memory: 140k freed > INIT: version 2.86 booting > * Files under mount point '/dev/shm' will be hidden. > Will now activate swap. > Done activating swap. > EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended > /etc/rcS.d/S18hwclockfirst.sh: line 61: /etc/adjtime: No such file or > directory > Setting the system clock.. > System Clock set. Local time: Sat Jan 1 00:00:19 UTC 2000. > Cleaning up ifupdown...done. > Calculating module dependencies...done. > Loading modules... > natsemi > natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002 > originally by Donald Becker <[EMAIL PROTECTED]> > http://www.scyld.com/network/natsemi.html > 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder > natsemi eth0: NatSemi DP8381[56] at 0x80040000 (0000:00:0e.0), > 00:0d:b9:03:7c:60 > , IRQ 10, port TP. > hostap_pci > hostap_pci: 0.4.4-kernel (Jouni Malinen <[EMAIL PROTECTED]>) > wd1100 > SC1x00 Watchdog driver by Inprimis Technolgies. > wd1100.c: a few hacks by [EMAIL PROTECTED] > lm77 > scx200_acb > All modules loaded. > /etc/rcS.d/S22hwclock.sh: line 61: /etc/adjtime: No such file or directory > Setting the system clock again.. > System Clock set. Local time: Sat Jan 1 00:00:25 UTC 2000. > Loading device-mapper supportdevice-mapper: 4.4.0-ioctl (2005-01-12) > initialised > : [EMAIL PROTECTED] > . > Will now check all file systems. > fsck 1.39-WIP (29-Mar-2006) > Checking all file systems. > Done checking file systems. > A log is being saved in /var/log/fsck/checkfs if that location is writable. > Setting kernel variables ... > ... done. > /etc/rcS.d/S35mountall.sh: line 10: /etc/init.d/bootclean.sh: No such > file or di > rectory > Running 0dns-down to make sure resolv.conf is > ok.../etc/ppp/ip-down.d/0dns-down: > line 33: cd: /var/run/pppconfig: No such file or directory > Setting up networking...done. > Setting hostname to '(none)'...hostname: the specified hostname is invalid > done. > Starting hotplug subsystem: > pci > ath_hal: module license 'Proprietary' taints kernel. > ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > wlan: 0.8.4.2 (svn 2006-03-27) > ath_rate_sample: 1.2 (svn 2006-03-27) > ath_pci: 0.9.4.5 (svn 2006-03-27) > wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps > wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps > wifi0: H/W encryption support: WEP AES AES_CCM TKIP > wifi0: mac 5.9 phy 4.3 radio 3.6 > wifi0: Use hw queue 1 for WME_AC_BE traffic > wifi0: Use hw queue 0 for WME_AC_BK traffic > wifi0: Use hw queue 2 for WME_AC_VI traffic > wifi0: Use hw queue 3 for WME_AC_VO traffic > wifi0: Use hw queue 8 for CAB traffic > wifi0: Use hw queue 9 for beacons > wifi0: Atheros 5212: mem=0x80000000, irq=12 > ath_pci: loaded successfully > natsemi: already loaded > scx200: NatSemi SCx200 Driver > scx200: GPIO base 0xf400 > scx200: Configuration Block base 0x9000 > scx200: loaded successfully > SC1200: IDE controller at PCI slot 0000:00:12.2 > SC1200: chipset revision 1 > SC1200: not 100% native mode: will probe irqs later > SC1200: port 0x01f0 already claimed by ide0 > ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio > sc1200: loaded successfully > scx200: already loaded > pci [success] > usb > usbcore: registered new driver usbfs > usbcore: registered new driver hub > USB Universal Host Controller Interface driver v2.3 > usb [failed] > isapnp > isapnp [success] > ide > ide [success] > input > input [success] > scsi > scsi [success] > done. > * /etc/network/options is deprecated. > Setting up IP spoofing protection...done (rp_filter). > Enabling packet forwarding...done. > Configuring network interfaces.../etc/network/interfaces:14: duplicate > interface > ifup: couldn't read interfaces file "/etc/network/interfaces" > failed. > Starting PCMCIA services...Intel ISA PCIC probe: not found. > * Using yenta_socket instead of i82365 > cardmgr[1502]: no sockets found! > failed. > Running ntpdate to synchronize clockError : Temporary failure in name > resolution > . > /etc/rcS.d/S55bootmisc.sh: line 28: /var/run/utmp: No such file or directory > Initializing random number generator...done. > INIT: Entering runlevel: 2 > Starting system log daemon: syslogdmknod: `/dev/xconsole': File exists > chown: changing ownership of `/dev/xconsole': No such file or directory > . > Starting kernel log daemon: klogd. > Starting DNS forwarder and DHCP server: dnsmasq. > Starting advanced IEEE 802.11 management: disabled via /etc/default/hostapd > Starting internet superserver: inetd. > nocatsplash daemon disabled - read /etc/default/nocatsplash. > Starting PPTP Daemon: pptpd. > Loading capability module if not yet done. > Starting Quagga daemons (prio:10):. > mkdir: cannot create directory `/var/run/sshd': No such file or directory > Starting periodic command scheduler.../usr/sbin/cron: can't open or > create /var/ > run/crond.pid: No such file or directory > failed! > Starting watchdog daemon: watchdog error: > Cannot create directory /var/log/watchdog > > ### Remounting / as read-write > ### Removing /etc/nologin > Usage: /etc/init.d/rmnologin start|stop > ### Remounting / as read-only > INIT: Id "T0" respawning too fast: disabled for 5 minutes > INIT: no more processes left in this runlevel > > ---------end output----------- > > -- > <=+=+=+==+=+=+==+=+=+=+=+=+=+=+=> > Edwin Whitelaw, P.E. > New River Valley Unwired, LLC > 2200 Lonesome Dove Dr > Christiansburg, VA 24073 > 540-239-0318 > > > _______________________________________________ > Voyage-linux mailing list > [email protected] > http://list.voyage.hk/mailman/listinfo/voyage-linux > -- -- Regards, Punky P U N K N ! X . c o m Technology + Lifestyle (http://www.punknix.com) Voyage Linux (http://www.voyage.hk/software/voyage.html) _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
