Hi Sasa,

Yes, exactly. Download the deb by wget, run "dpkg -i <kernel deb>", and reboot.

If you are using madwifi-ng driver, download and install the module deb as well. http://www.voyage.hk/dists/unstable/madwifi/madwifi-ng-modules-2.6.15-486-voyage_0.svnr1491.20060403-1+2.0-10_i386.deb

If you don't know what it is going to do, do not upgrade it.
Punky

Sasa wrote:
Hey,

How can I install that kernel ? I really, I mean really really can't
afford voyage to break or something... since i currently can't access it
it's about 100 meters on some tower and i don't have a key.
Should dpkg -i kernel.deb; reboot be sufficient or ?

I will first try without watchdog, so i can eliminate watchdog as
potencial problem maker.

Thanks,
Sasa


Kim-man \"Punky\" TSE wrote:
Hi Sasa,

You really don't need to shutdown watchdog.  But if you insist in doing
so, you should unload "wd1100" watchdog driver, or remove wd1100 line in
/etc/modules and reboot.  If possible, please stress test 2.6.15_2.0-10
kernel which is available at:


http://www.voyage.hk/dists/unstable/kernel/kernel-image-2.6.15-486-voyage_2.0-10_i386.deb

This kernel should be stable enough for high traffic load.  I also
invite all list users to test as this will be the kernel for 0.2 release.

- Punky

Sasa wrote:
lpap:~# uname -a
Linux lpap 2.6.15-486-voyage #1 PREEMPT Fri Feb 24 18:12:35 GMT 2006
i586
GNU/Linux
lpap:~#

This is on a WRAP box, 266MHz, with 128 mb of ram

I can't really experiment now since there's few users connected... a
once
tryed to shutdown watchdog, that resulted in system reboot... again.
Is there a way to shut it down ? I don't really need it since i will
monitor everything with MRTG including cpu temperature, load, etc.

Regards,
Sasa

Punky wrote:

Hi Sasa,

- What kernel you are running?  Show me the "uname -a".

I encountered the similar issue in a few weeks when I conduct the
benchmark test.  But the latest kernel (2.0-10) should be stable
enough for high volume transfer.

Regards,
Punky

On 4/4/06, Sasa <[EMAIL PROTECTED]> wrote:

Hello,

I have an issue with (watchdog(i think))...
When i download something from DC (via AP with voyage linux) and load
increases AP reboots itself. When it boots i can see a line in dmesg
which
states "system was rebooted by watchdog" or similiar.
My watchdog.conf is a default file which comes with distribution and
every
minute or so i see watchdog[defunct] process, and then it dies.

Thanks,
Sasa



_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux


--
--
Regards,
Punky
P U N K N ! X  . c o m
Technology + Lifestyle
(http://www.punknix.com)

Voyage Linux
(http://www.voyage.hk/software/voyage.html)



_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux

--
Regards,
Punky
P U N K N ! X . c o m
Technology + Lifestyle
(http://www.punknix.com)

Voyage Linux
(http://www.voyage.hk/software/voyage.html)






--
Regards,
Punky
P U N K N ! X . c o m
Technology + Lifestyle
(http://www.punknix.com)

Voyage Linux
(http://www.voyage.hk/software/voyage.html)


_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux

Reply via email to