Thank you for your feedback. However, that is not the problem. The drive
had been partitioned and formatted prior to the install as you suggest.
As you can see from the output below, the install is successful up until
the lilo portion. From this, it is clear that there is a bug in the
install script. I am not asking for help here but rather attempting to
point out an issue that could be addressed by Voyage maintainers(if this
sounds rude, its unintended).
Burlen
Cool/Explosion wrote:
Hi burlen,
you must make filesystem on sdc.
You can use fdisk or cfdisk (its easyer)
and mkfs.ext2 /dev/sdc1 to format fs....
Bye CoolEx...
burlen napsal(a):
Hi all, I have been having some issues with my net4521 and decided
that I should attempt a Voyage install as a sanity check. However,
when I make the install, I have the following issue(note grub install
does finish with no errors):
Configuration details:
----------------------
Distribution directory: /home/burlen/voyage-0.4.1
Disk/Flash Device: /dev/sdc
Installation Partition: /dev/sdc1
Will be mounted on: /home/burlen/target
Target system profile: 4511/4521
Target console: serial
Target baud rate: 9600
Bootstrap installer: lilo
OK to continue (y/n)? y
Ready to go ....
Copying files .... done
Removing dnsmasq.pxe.conf in /etc/dnsmasq.more.conf
Fatal: stat /dev/sdc: No such file or directory
Fatal Error: Failed to chroot to to install lilo
copyfiles.sh script completed
finally, stat does indeed work,
$stat /dev/sdc
File: `/dev/sdc'
Size: 0 Blocks: 0 IO Block: 4096 block
special file
Device: eh/14d Inode: 552253 Links: 1 Device type: 8,20
Access: (0660/brw-rw----) Uid: ( 0/ root) Gid: ( 46/ plugdev)
Access: 2008-01-17 08:49:03.556142901 -0500
Modify: 2008-01-17 08:48:59.555914941 -0500
Change: 2008-01-17 08:48:59.555914941 -0500
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
