Hi burlen,
you must make filesystem on sdc.
You can use fdisk or cfdisk (its easyer)
and mkfs.ext2 /dev/sdc1 to format fs....
Bye CoolEx...
burlen napsal(a):
Hi all, I have been having some issues with my net4521 and decided
that I should attempt a Voyage install as a sanity check. However,
when I make the install, I have the following issue(note grub install
does finish with no errors):
Configuration details:
----------------------
Distribution directory: /home/burlen/voyage-0.4.1
Disk/Flash Device: /dev/sdc
Installation Partition: /dev/sdc1
Will be mounted on: /home/burlen/target
Target system profile: 4511/4521
Target console: serial
Target baud rate: 9600
Bootstrap installer: lilo
OK to continue (y/n)? y
Ready to go ....
Copying files .... done
Removing dnsmasq.pxe.conf in /etc/dnsmasq.more.conf
Fatal: stat /dev/sdc: No such file or directory
Fatal Error: Failed to chroot to to install lilo
copyfiles.sh script completed
finally, stat does indeed work,
$stat /dev/sdc
File: `/dev/sdc'
Size: 0 Blocks: 0 IO Block: 4096 block
special file
Device: eh/14d Inode: 552253 Links: 1 Device type: 8,20
Access: (0660/brw-rw----) Uid: ( 0/ root) Gid: ( 46/ plugdev)
Access: 2008-01-17 08:49:03.556142901 -0500
Modify: 2008-01-17 08:48:59.555914941 -0500
Change: 2008-01-17 08:48:59.555914941 -0500
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
