Spoke to soon, it's still broken :-(
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > On Behalf Of Wayne Lee > Sent: 14 April 2008 11:09 > To: [EMAIL PROTECTED] > Subject: RE: [Voyage-linux] mounting local file systems failed *** > SOLVED *** > > Solved, > > One of the main changes I had made (apart from installing other > software) was to change the root RW partition from 8mb to 15mb. > > I had made the same change on an older version without any trouble, > Punky is there any reason it causes a failure now and is it still > possible to change it? > > > Thanks > > Wayne > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:voyage-linux-bounces+wayne.lee=link- > [EMAIL PROTECTED] > > On Behalf Of Wayne Lee > > Sent: 14 April 2008 10:26 > > To: [EMAIL PROTECTED] > > Subject: [Voyage-linux] mounting local file systems failed > > > > Hi Guys > > > > > > I'm playing with a new install of voyage 0.4.1, when mounting the > > filesystems during boot it is failing, it then continues to load the > OS > > fine and it can remount the drives RW and Ro at the last stages of > > boot. > > > > Below is the boot process and marked the mount processes with *****. > > > > > > Thanks > > > > > > Wayne > > > > > > [Linux-initrd @ 0xfe10000, 0x1df28f bytes] > > > > [6nLinux version 2.6.20-486-voyage ([EMAIL PROTECTED]) (gcc version > > 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 PREEMPT Mon Jul 16 > > 06:39:47 GMT 2007 () > > BIOS-provided physical RAM map: > > sanitize start > > sanitize end > > copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: > > 000000000009fc00 type: 1 > > copy_e820_map() type is E820_RAM > > copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: > > 00000000000a0000 type: 2 > > copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: > > 0000000000100000 type: 2 > > copy_e820_map() start: 0000000000100000 size: 000000000ff00000 end: > > 0000000010000000 type: 1 > > copy_e820_map() type is E820_RAM > > copy_e820_map() start: 00000000fff00000 size: 0000000000100000 end: > > 0000000100000000 type: 2 > > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > > BIOS-e820: 0000000000100000 - 0000000010000000 (usable) > > BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) > > 256MB LOWMEM available. > > Zone PFN ranges: > > DMA 0 -> 4096 > > Normal 4096 -> 65536 > > early_node_map[1] active PFN ranges > > 0: 0 -> 65536 > > DMI not present or invalid. > > Allocating PCI resources starting at 20000000 (gap: > 10000000:eff00000) > > Detected 266.668 MHz processor. > > Built 1 zonelists. Total pages: 65024 > > Kernel command line: root=/dev/hdb1 console=ttyS0,9600n8 > > No local APIC present or hardware disabled > > Initializing CPU#0 > > PID hash table entries: 1024 (order: 10, 4096 bytes) > > Console: colour dummy device 80x25 > > Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) > > Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) > > Memory: 254652k/262144k available (1610k kernel code, 6936k reserved, > > 562k data, 148k init, 0k highmem) > > virtual kernel memory layout: > > fixmap : 0xfffbb000 - 0xfffff000 ( 272 kB) > > vmalloc : 0xd0800000 - 0xfffb9000 ( 759 MB) > > lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) > > .init : 0xc0322000 - 0xc0347000 ( 148 kB) > > .data : 0xc029297e - 0xc031f1ac ( 562 kB) > > .text : 0xc0100000 - 0xc029297e (1610 kB) > > Checking if this processor honours the WP bit even in supervisor > > mode... Ok. > > Calibrating delay using timer specific routine.. 533.84 BogoMIPS > > (lpj=266924) > > Mount-cache hash table entries: 512 > > Compat vDSO mapped to ffffe000. > > Remapping vsyscall page to ffffe000 > > CPU: NSC Unknown stepping 01 > > Checking 'hlt' instruction... OK. > > NET: Registered protocol family 16 > > PCI: PCI BIOS revision 2.01 entry at 0xf7861, last bus=1 > > PCI: Using configuration type 1 > > Setting up standard PCI resources > > PCI: Probing PCI hardware > > PCI: Bridge: 0000:00:0a.0 > > IO window: d000-dfff > > MEM window: a4000000-a7ffffff > > PREFETCH window: 20000000-200fffff > > NET: Registered protocol family 2 > > IP route cache hash table entries: 2048 (order: 1, 8192 bytes) > > TCP established hash table entries: 8192 (order: 3, 32768 bytes) > > TCP bind hash table entries: 4096 (order: 2, 16384 bytes) > > TCP: Hash tables configured (established 8192 bind 4096) > > TCP reno registered > > checking if image is initramfs... it is > > Freeing initrd memory: 1916k freed > > geode-mfgpt: Not a Geode GX/LX processor > > io scheduler noop registered > > io scheduler cfq registered (default) > > Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing > > enabled > > ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > > mice: PS/2 mouse device common for all mice > > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > > ide: Assuming 33MHz system bus speed for PIO modes; override with > > idebus=xx > > SC1200: IDE controller at PCI slot 0000:00:12.2 > > SC1200: chipset revision 1 > > SC1200: not 100% native mode: will probe irqs later > > ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:pio, hdb:pio > > ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio > > hdb: CF CARD 1GB, ATA DISK drive > > hdb: sc1200_set_xfer_mode(MW DMA 2) > > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > > hdb: max request size: 128KiB > > hdb: 1981728 sectors (1014 MB) w/1KiB Cache, CHS=1966/16/63, DMA > > hdb: hdb1 > > i8042.c: Can't read CTR while initializing i8042. > > i8042: probe of i8042 failed with error -5 > > padlock: No VIA PadLock drivers have been loaded. > > padlock: VIA PadLock not detected. > > padlock: VIA PadLock Hash Engine not detected. > > TCP cubic registered > > NET: Registered protocol family 1 > > NET: Registered protocol family 17 > > Using IPI Shortcut mode > > Time: tsc clocksource has been installed. > > Freeing unused kernel memory: 148k freed > > Loading, please wait... > > Begin: Loading essential drivers... ... > > Done. > > Begin: Running /scripts/init-premount ... > > natsemi dp8381x driver, version 2.1, Sept 11, 2006 > > originally by Donald Becker <[EMAIL PROTECTED]> > > http://www.scyld.com/network/natsemi.html > > 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder > > natsemi eth0: NatSemi DP8381[56] at 0xa0000000 (0000:00:06.0), > > 00:00:24:c9:49:a4, IRQ 10, port TP. > > natsemi eth1: NatSemi DP8381[56] at 0xa0001000 (0000:00:07.0), > > 00:00:24:c9:49:a5, IRQ 10, port TP. > > natsemi eth2: NatSemi DP8381[56] at 0xa0002000 (0000:00:08.0), > > 00:00:24:c9:49:a6, IRQ 10, port TP. > > natsemi eth3: NatSemi DP8381[56] at 0xa4000000 (0000:01:00.0), > > 00:00:24:c8:2d:18, IRQ 5, port TP. > > natsemi eth4: NatSemi DP8381[56] at 0xa4001000 (0000:01:01.0), > > 00:00:24:c8:2d:19, IRQ 11, port TP. > > usbcore: registered new interface driver usbfs > > usbcore: registered new interface driver hub > > usbcore: registered new device driver usb > > ohci_hcd 0000:00:13.0: OHCI Host Controller > > ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 > > ohci_hcd 0000:00:13.0: irq 11, io mem 0xa0003000 > > usb usb1: configuration #1 chosen from 1 choice > > hub 1-0:1.0: USB hub found > > hub 1-0:1.0: 3 ports detected > > Done. > > Begin: Mounting root file system... ... > > Begin: Running /scripts/local-top ... > > Done. > > Begin: Running /scripts/local-premount ... > > Done. > > Begin: Running /scripts/local-bottom ... > > Done. > > Done. > > Begin: Running /scripts/init-bottom ... > > Done. > > > > INIT: version 2.86 booting > > > > hostname: the specified hostname is invalid > > Starting the hotplug events dispatcher: udevd. > > Synthesizing the initial hotplug events...done. > > Waiting for /dev to be fully populated...scx200: NatSemi SCx200 > Driver > > scx200: GPIO base 0x6100 > > scx200: Configuration Block base 0x6000 > > done. > > Activating swap...done. > > /etc/rcS.d/S11hwclock.sh: line 51: /etc/adjtime: No such file or > > directory > > Setting the system clock.. > > Cleaning up ifupdown.... > > Loading kernel modules...hostap_pci: 0.4.4-kernel (Jouni Malinen > > <[EMAIL PROTECTED]>) > > done. > > Loading device-mapper supportdevice-mapper: ioctl: 4.11.0-ioctl > (2006- > > 10-12) initialised: [EMAIL PROTECTED] > > TSC appears to be running slowly. Marking it as unstable > > Time: pit clocksource has been installed. > > . > > Checking file systems...fsck 1.40-WIP (14-Nov-2006) > > done. > > Setting kernel variables...done. > > ***** Mounting local filesystems...[31mfailed.[39;49m ***** > > Activating swapfile swap...done. > > Setting up networking.... > > Configuring network interfaces...eth0: DSPCFG accepted after 0 usec. > > eth1: DSPCFG accepted after 0 usec. > > NET: Registered protocol family 10 > > lo: Disabled Privacy Extensions > > ADDRCONF(NETDEV_UP): eth0: link is not ready > > ADDRCONF(NETDEV_UP): eth1: link is not ready > > Mobile IPv6 > > eth2: DSPCFG accepted after 0 usec. > > ADDRCONF(NETDEV_UP): eth2: link is not ready > > eth3: DSPCFG accepted after 0 usec. > > ADDRCONF(NETDEV_UP): eth3: link is not ready > > eth4: DSPCFG accepted after 0 usec. > > ADDRCONF(NETDEV_UP): eth4: link is not ready > > done. > > Starting "Shorewall firewall": not done (check /var/log/shorewall- > > init.log). > > Starting portmap daemon.... > > > > INIT: Entering runlevel: 2 > > > > Starting system log daemon: syslogd. > > Starting kernel log daemon: klogd. > > Starting DNS forwarder and DHCP server: dnsmasq. > > Starting portmap daemon...Already running.. > > Starting advanced IEEE 802.11 management: disabled via > > /etc/default/hostapd. > > nocatsplash daemon disabled - read /etc/default/nocatsplash. > > [33m*[39;49m Not starting internet superserver: no services > enabled. > > Starting PPTP Daemon: pptpd. > > Starting network management services: snmpd. > > Starting OpenBSD Secure Shell server: sshd. > > Starting periodic command scheduler: crond. > > Starting watchdog daemon: watchdog. > > ***** Remounting / as read-write ... Done. ***** > > ***** Removing /etc/nologin ... Done. ***** > > ***** Remounting / as read-only ... Done. ***** > > > > Debian GNU/Linux 4.0 MAN-D&D ttyS0 > > > > MAN-D&D login: > > > > > > _______________________________________________ > > Voyage-linux mailing list > > [email protected] > > http://list.voyage.hk/mailman/listinfo/voyage-linux > > _______________________________________________ > Voyage-linux mailing list > [email protected] > http://list.voyage.hk/mailman/listinfo/voyage-linux _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
