Hi Jeff, You need to go through step-by-step, from 1 - 6. After 6, you will be prompted to go for writing to disk.
Regards, Punky On 12/21/2010 5:12 AM, [email protected] wrote:
Punky, Thanks for your help. I started over so I could answer your question.Once I got to this section, 4. Start voyage.update installation script # /usr/local/sbin/voyage.update Following the instruction to select /tmp/root as distribution directory, and /tmp/cf as mount point. After the installation complete, simple reboot the board and Voyage will be started! I realized I was not sure about most of the questions. So, the first question was "what would you like to do?" I answered 1-create new voyage Linux disk Second Question "What would you like to do?" 1-specify distribution directory 2-select target profile 3-select target disk 4-select target bootstrap loader 5-configure target console 6-partition and create file system Which do I pick? ----- Original Message ---- From: Kim-man 'Punky' TSE<[email protected]> To: [email protected] Sent: Sun, December 19, 2010 9:06:33 PM Subject: Re: [Voyage-linux] Voyage-MPD install Hi Jeff, The screen should show all the partitions of your disks, what are they? On 12/20/2010 6:50 AM, [email protected] wrote:Which device accesses the target disk {/dev/hde]?-- Regards, Punky Voyage Solutions (http://solution.voyage.hk) * Embedded Solutions and Systems - Mesh Networking, Captive Portal, IP Surveillance, VoIP/PBX - Network Engineering, Development Platform and Consultation
-- Regards, Punky Voyage Solutions (http://solution.voyage.hk) * Embedded Solutions and Systems - Mesh Networking, Captive Portal, IP Surveillance, VoIP/PBX - Network Engineering, Development Platform and Consultation _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
