@Beat Meier
Thank you very much for your help.
Regards,
Kostas
On 31/5/2011 3:43 πμ, Beat Meier wrote:
Ok nevertheless I put you my files I've found
I did the following on my alix board with voyage-0.5.2:
/etc/ppp/peers/3g_telecom
/etc/chatscripts/3g_telecom
which was for an E160 modem and
/etc/ppp/peers/3g_movistar
/etc/chatscripts/3g_movistar
/etc/usb_modeswitch.d/19d2:2000
which I think was the ZTE MF110
and generall stuff
/etc/ppp/ip-up.d/setup_3g
(/etc/ppp/ip-down.d/clean_3g not provided)
The modem ZTE MF110 (I think it was this model...) I started
usb_modeswitch -c /etc/usb_modeswitch.d/19d2:2000
/sbin/modprobe usbserial vendor=0x19d2 product=0x0031
pon 3g_movistar
at least found a note about that
An entry in /etc/network/interface like
###################################
auto 3g_telecom
iface 3g_telecom inet ppp
provider 3g_telecom
address 200.200.200.123
netmask 255.255.255.0
# please do not modify the following line
pre-up /sbin/ifconfig eth0 up
###################################
will start modem automatically at startup, where address is not
imported because received and set from pppd
This was for the E160. I cannot test anymore because have not anymore
access for this devices ...
Maybe it helps
Greetings
Beat
On 05/29/2011 10:45 AM, Konstantinos Birkos wrote:
Yes, I managed to connect. Actually I needed to install
usb-modeswitch and write two scripts: one with the connections
parameters and another one handling connection establishment. For
some reason I cannot understand, although I can connect, receive
updates, use ftp etc., I cannot ping other computers and neither can
other computers ping me (plus that the green light on the stick keeps
flashing on and off continuously).
Thanks for your feedback.
Regards,
Kostas
O/H Beat Meier έγραψε:
Have you solved your problem?
I had such a modem working (ZTE MF110) on voyage-0.5 some time ago
but have to search how I did.
If you still have the problem send a note and I will search my old
cf flash with the installation!
Greetings
Beat
On 05/22/2011 08:11 PM, Konstantinos Birkos wrote:
I am trying to get a 3G USB modem working in an ALIX.3d3 board with
Voyage Linux MPD 0.7. The modem is a ZTE MF110 and works perfectly
in common Linux distributions.
What steps should I follow? Until now I have found partial
instructions, instructions that involve a GUI or solutions to
specific problems but not a concrete set of instructions. Just to
mention that when I plug the modem it is recognized as a scsi usb
storage device and a scsi CD-ROM drive but no ttyUSB0 or ttyUSB1
appears as a device. Any point to start with?
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
--
Konstantinos Birkos
PhD Student
Wireless Telecommunication Laboratory
Department of Electrical and Computer Engineering
University of Patras
Patras, Greece
Tel.: +30 2610 996465
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
