Still no luck.
I checked /etc/depmod.d and there is no conf file for the leds. Also a grep on dmesg for led results in the following: [ 0.226815] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.289160] pci 0000:00:0f.4: PCI INT D disabled [ 0.289599] pci 0000:00:0f.5: PCI INT D disabled [ 1.298387] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.367310] cs5535-mfd 0000:00:0f.0: MFD add devices failed: -16 [ 1.367441] cs5535-mfd: probe of 0000:00:0f.0 failed with error -16 [ 2.255716] i8042: probe of i8042 failed with error -5 [ 2.651705] amd74xx 0000:00:0f.2: IDE port disabled [ 3.666963] hda: host side 80-wire cable detection failed, limiting max speed to UDMA33 [ 3.684604] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 5.223530] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 5.300132] geode-aes: GEODE AES engine enabled. [ 8.838586] Registered led device: ath9k-phy0 [ 8.840782] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [ 10.531465] Registered led device: ath9k-phy1 Thanks in advance, John From: Artie Gold [mailto:[email protected]] Sent: Friday, November 02, 2012 1:27 PM To: John Schultz Cc: [email protected] Subject: Re: [Voyage-linux] ALIX LEDs This may help: http://pcengines.info/forums/?page=post <http://pcengines.info/forums/?page=post&id=CB3A7583-18BF-49F5-9D39-2B171513 DEA2> &id=CB3A7583-18BF-49F5-9D39-2B171513DEA2 --ag On Fri, Nov 2, 2012 at 2:02 PM, John Schultz <[email protected]> wrote: Getting the same error. Well except its for that specific module J. Thanks for the assist, John From: Artie Gold [mailto:[email protected]] Sent: Friday, November 02, 2012 12:53 PM To: John Schultz Cc: [email protected] Subject: Re: [Voyage-linux] ALIX LEDs Try 'modprobe leds-alix2'. HTH, --ag On Fri, Nov 2, 2012 at 1:34 PM, John Schultz <[email protected]> wrote: Using an alix 3d3 and version 0.8.0 dated 06/10/2012. When doing a modprobe leds-alix, I get the following error: WARNING: All config files need .conf: /etc/modprobe.d/hostap-utils, it will be ignored in a future release. FATAL: Module leds_alix not found. What do I need to do to get this working? Thanks, John _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux -- Artie Gold Principal Software Engineer Under Assistant West Coast Promo Man F4W, Inc. =================================================== Ten minutes of concentrated work can often be worth as much as several hours of discussion, planning and coordination. And it only costs ten minutes. _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux -- Artie Gold Principal Software Engineer Under Assistant West Coast Promo Man F4W, Inc. =================================================== Ten minutes of concentrated work can often be worth as much as several hours of discussion, planning and coordination. And it only costs ten minutes.
_______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
