Hi, are you using a null-modem cable or some funny gender changer? it must be a null-modem cable...
Best regards, Michael Steinmann 2014-11-10 2:52 GMT+01:00 Kim-man 'Punky' TSE <punky...@punknix.com>: > On 11/7/2014 4:29 PM, Abhay Gupta wrote: > >> I configured putty over */etc/ttyUSB0* with speed(baud) = 9600 as well as >> 115200. >> >> But when I power up my ALIX board, nothing is displayed over putty. I >> even tried with *minicom* and *gtkterm* >> >> Please help me in this regard. Many thanks in advance :) :) >> >> >> minicom always works for me. In minicom setup screen, set 115200, 8N1 > and serial device for /dev/ttyUSB0. It is /dev, not /etc. > > -- > Regards, > Kim-man "Punky" Tse > > * Open Source Embedded Solutions and Systems > - Voyage Linux (http://linux.voyage.hk) > - Voyage MPD (http://linux.voyage.hk/voyage-mpd) > - Voyage MuBox (http://mubox.voyage.hk) > * Voyage Store (http://store.voyage.hk) > > > _______________________________________________ > Voyage-linux mailing list > Voyage-linux@list.voyage.hk > http://list.voyage.hk/mailman/listinfo/voyage-linux >
_______________________________________________ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux