It seems that scsi driver on wrap is not loaded but why??? Here relevant message outputs...
Good case: [ 1.222581] Freeing unused kernel memory: 368k freed [ 1.224356] Write protecting the kernel text: 2912k [ 1.225174] Write protecting the kernel read-only data: 956k Loading, please wait... [ 1.267921] udevd[900]: starting version 175 [ 1.495676] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker [ 1.533346] via-rhine 0000:00:09.0 eth0: VIA Rhine III (Management Adapter) at 0xe0000000, 00:0d:b9:12:52:f8, IRQ 11 [ 1.534754] via-rhine 0000:00:09.0 eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link cde1 [ 1.571688] via-rhine 0000:00:0a.0 eth1: VIA Rhine III (Management Adapter) at 0xe0040000, 00:0d:b9:12:52:f9, IRQ 15 [ 1.574070] via-rhine 0000:00:0a.0 eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000 [ 1.610341] via-rhine 0000:00:0b.0 eth2: VIA Rhine III (Management Adapter) at 0xe0080000, 00:0d:b9:12:52:fa, IRQ 9 [ 1.611449] via-rhine 0000:00:0b.0 eth2: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000 [ 1.612862] usbcore: registered new interface driver usbfs [ 1.629751] scsi0 : pata_amd [ 1.632038] usbcore: registered new interface driver hub [ 1.636088] scsi1 : pata_amd [ 1.637086] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 1.638004] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 1.642902] usbcore: registered new device driver usb [ 1.655749] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.669872] ehci-pci: EHCI PCI platform driver [ 1.674420] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.697905] ohci_hcd 0000:00:0f.4: OHCI Host Controller [ 1.711642] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 1 [ 1.730681] ohci_hcd 0000:00:0f.4: irq 9, io mem 0xefffe000 [ 1.815892] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.817291] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.817964] usb usb1: Product: OHCI Host Controller [ 1.818631] usb usb1: Manufacturer: Linux 3.10.11-voyage ohci_hcd [ 1.819928] usb usb1: SerialNumber: 0000:00:0f.4 [ 1.822755] ata1.00: CFA: CF 4GB, 20090819, max UDMA/100 [ 1.823732] ata1.00: 7847280 sectors, multi 0: LBA [ 1.836858] ata1.00: configured for UDMA/100 [ 1.838205] scsi 0:0:0:0: Direct-Access ATA CF 4GB 2009 PQ: 0 ANSI: 5 [ 1.840128] sd 0:0:0:0: [sda] 7847280 512-byte logical blocks: (4.01 GB/3.74 GiB) [ 1.840844] sd 0:0:0:0: [sda] Write Protect is off [ 1.843108] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1.851881] hub 1-0:1.0: USB hub found [ 1.876294] hub 1-0:1.0: 4 ports detected [ 1.888781] ehci-pci 0000:00:0f.5: EHCI Host Controller [ 1.890780] ehci-pci 0000:00:0f.5: new USB bus registered, assigned bus number 2 [ 1.892062] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > [ 1.895041] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.904715] ehci-pci 0000:00:0f.5: irq 9, io mem 0xefffd000 [ 1.923587] ehci-pci 0000:00:0f.5: USB 2.0 started, EHCI 1.00 Bad case: [ 6.350784] Freeing unused kernel memory: 368k freed [ 6.370988] Write protecting the kernel text: 2912k [ 6.386335] Write protecting the kernel read-only data: 956k Loading, please wait... [ 6.638541] udevd[887]: starting version 175 [ 7.672713] natsemi dp8381x driver, version 2.1, Sept 11, 2006 [ 7.672713] originally by Donald Becker <[email protected]> [ 7.672713] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder [ 8.219126] natsemi eth0: NatSemi DP8381[56] at 0x80000000 (0000:00:0e.0), 00:0d:b9:07:23:7c, IRQ 10, port TP. [ 8.284939] natsemi eth1: NatSemi DP8381[56] at 0x80040000 (0000:00:10.0), 00:0d:b9:07:23:7d, IRQ 11, port TP. Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Waiting for root file system ... [ 15.900068] Clocksource tsc unstable (delta = -262848077 ns) [ 15.917733] Switching to clocksource pit done. Gave up waiting for root device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) ALERT! /dev/block/8:5 does not exist. Dropping to a shell! [ 49.028571] usbcore: registered new interface driver usbfs [ 49.032827] usbcore: registered new interface driver hub [ 49.036719] usbcore: registered new device driver usb [ 49.063157] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 49.075738] ehci-pci: EHCI PCI platform driver [ 49.174166] uhci_hcd: USB Universal Host Controller Interface driver [ 49.237167] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 49.314712] usbcore: registered new interface driver usbhid [ 49.315667] usbhid: USB HID core driver (initramfs) (initramfs) (initramfs) On 03/02/2015 08:33 AM, Beat Meier wrote: > Hello > > I have troube with voyage 0.9.2. I have installed alix version this will > not boot anymore on wrap boards. > I see not any significant difference on modules running on both systems > at least not that root fs is not found. > Is initfs build without ext3 support??? > I get the following error: > > Begin: Loading essential drivers ... > done. > > > > Begin: Running /scripts/init-premount ... > done. > > > > Begin: Mounting root file system ... Begin: Running /scripts/local-top > ... > done. > > > Begin: Waiting for root file system ... [ 15.831619] Clocksource tsc > unstable (delta = -329063624 > ns) > > > [ 15.849287] Switching to clocksource > pit > > > > > > > done. > > > > Gave up waiting for root device. Common > problems: > > > > - Boot args (cat > /proc/cmdline) > > > > - Check rootdelay= (did the system wait long > enough?) > > > > - Check root= (did the system wait for the right > device?) > > > > - Missing modules (cat /proc/modules; ls > /dev) > > > > ALERT! /dev/block/8:5 does not exist. Dropping to a shell! > > What I see is that voyage-0.5 use hda where 0.9.2 use sda but this has > nothing todo with different platform :-( > I'm using lilo. Yes I need lilo ... > > BTW: Booting voyage-0.5 and 0.9.2 with lilo no problem (both system on > cf card) while only on alix ... > > Any hints? > > > > > _______________________________________________ > Voyage-linux mailing list > [email protected] > http://list.voyage.hk/mailman/listinfo/voyage-linux > _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
