Hi Beat,
It is known problem. The voyage kernel changed to use new PATA modules and this kernel broke on wrap. You need to use
newer kernel (3.14.12) or older (3.8.13).
Regards,
Punky
On 3/2/2015 8:52 PM, Beat Meier wrote:
It seems that scsi driver on wrap is not loaded but why???
Here relevant message outputs...
Good case:
[ 1.222581] Freeing unused kernel memory: 368k freed
[ 1.224356] Write protecting the kernel text: 2912k
[ 1.225174] Write protecting the kernel read-only data: 956k
Loading, please wait...
[ 1.267921] udevd[900]: starting version 175
[ 1.495676] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[ 1.533346] via-rhine 0000:00:09.0 eth0: VIA Rhine III (Management
Adapter) at 0xe0000000, 00:0d:b9:12:52:f8, IRQ 11
[ 1.534754] via-rhine 0000:00:09.0 eth0: MII PHY found at address 1,
status 0x7869 advertising 05e1 Link cde1
[ 1.571688] via-rhine 0000:00:0a.0 eth1: VIA Rhine III (Management
Adapter) at 0xe0040000, 00:0d:b9:12:52:f9, IRQ 15
[ 1.574070] via-rhine 0000:00:0a.0 eth1: MII PHY found at address 1,
status 0x7849 advertising 05e1 Link 0000
[ 1.610341] via-rhine 0000:00:0b.0 eth2: VIA Rhine III (Management
Adapter) at 0xe0080000, 00:0d:b9:12:52:fa, IRQ 9
[ 1.611449] via-rhine 0000:00:0b.0 eth2: MII PHY found at address 1,
status 0x7849 advertising 05e1 Link 0000
[ 1.612862] usbcore: registered new interface driver usbfs
[ 1.629751] scsi0 : pata_amd
[ 1.632038] usbcore: registered new interface driver hub
[ 1.636088] scsi1 : pata_amd
[ 1.637086] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00
irq 14
[ 1.638004] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08
irq 15
[ 1.642902] usbcore: registered new device driver usb
[ 1.655749] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.669872] ehci-pci: EHCI PCI platform driver
[ 1.674420] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.697905] ohci_hcd 0000:00:0f.4: OHCI Host Controller
[ 1.711642] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned
bus number 1
[ 1.730681] ohci_hcd 0000:00:0f.4: irq 9, io mem 0xefffe000
[ 1.815892] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.817291] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.817964] usb usb1: Product: OHCI Host Controller
[ 1.818631] usb usb1: Manufacturer: Linux 3.10.11-voyage ohci_hcd
[ 1.819928] usb usb1: SerialNumber: 0000:00:0f.4
[ 1.822755] ata1.00: CFA: CF 4GB, 20090819, max UDMA/100
[ 1.823732] ata1.00: 7847280 sectors, multi 0: LBA
[ 1.836858] ata1.00: configured for UDMA/100
[ 1.838205] scsi 0:0:0:0: Direct-Access ATA CF 4GB
2009 PQ: 0 ANSI: 5
[ 1.840128] sd 0:0:0:0: [sda] 7847280 512-byte logical blocks: (4.01
GB/3.74 GiB)
[ 1.840844] sd 0:0:0:0: [sda] Write Protect is off
[ 1.843108] sd 0:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.851881] hub 1-0:1.0: USB hub found
[ 1.876294] hub 1-0:1.0: 4 ports detected
[ 1.888781] ehci-pci 0000:00:0f.5: EHCI Host Controller
[ 1.890780] ehci-pci 0000:00:0f.5: new USB bus registered, assigned
bus number 2
[ 1.892062] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 1.895041] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.904715] ehci-pci 0000:00:0f.5: irq 9, io mem 0xefffd000
[ 1.923587] ehci-pci 0000:00:0f.5: USB 2.0 started, EHCI 1.00
Bad case:
[ 6.350784] Freeing unused kernel memory: 368k freed
[ 6.370988] Write protecting the kernel text: 2912k
[ 6.386335] Write protecting the kernel read-only data: 956k
Loading, please wait...
[ 6.638541] udevd[887]: starting version 175
[ 7.672713] natsemi dp8381x driver, version 2.1, Sept 11, 2006
[ 7.672713] originally by Donald Becker <[email protected]>
[ 7.672713] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
[ 8.219126] natsemi eth0: NatSemi DP8381[56] at 0x80000000
(0000:00:0e.0), 00:0d:b9:07:23:7c, IRQ 10, port TP.
[ 8.284939] natsemi eth1: NatSemi DP8381[56] at 0x80040000
(0000:00:10.0), 00:0d:b9:07:23:7d, IRQ 11, port TP.
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top
... done.
Begin: Waiting for root file system ... [ 15.900068] Clocksource tsc
unstable (delta = -262848077 ns)
[ 15.917733] Switching to clocksource pit
done.
Gave up waiting for root device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Check root= (did the system wait for the right device?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/block/8:5 does not exist. Dropping to a shell!
[ 49.028571] usbcore: registered new interface driver usbfs
[ 49.032827] usbcore: registered new interface driver hub
[ 49.036719] usbcore: registered new device driver usb
[ 49.063157] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 49.075738] ehci-pci: EHCI PCI platform driver
[ 49.174166] uhci_hcd: USB Universal Host Controller Interface driver
[ 49.237167] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 49.314712] usbcore: registered new interface driver usbhid
[ 49.315667] usbhid: USB HID core driver
(initramfs)
(initramfs)
(initramfs)
On 03/02/2015 08:33 AM, Beat Meier wrote:
Hello
I have troube with voyage 0.9.2. I have installed alix version this will
not boot anymore on wrap boards.
I see not any significant difference on modules running on both systems
at least not that root fs is not found.
Is initfs build without ext3 support???
I get the following error:
Begin: Loading essential drivers ...
done.
Begin: Running /scripts/init-premount ...
done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top
...
done.
Begin: Waiting for root file system ... [ 15.831619] Clocksource tsc
unstable (delta = -329063624
ns)
[ 15.849287] Switching to clocksource
pit
done.
Gave up waiting for root device. Common
problems:
- Boot args (cat
/proc/cmdline)
- Check rootdelay= (did the system wait long
enough?)
- Check root= (did the system wait for the right
device?)
- Missing modules (cat /proc/modules; ls
/dev)
ALERT! /dev/block/8:5 does not exist. Dropping to a shell!
What I see is that voyage-0.5 use hda where 0.9.2 use sda but this has
nothing todo with different platform :-(
I'm using lilo. Yes I need lilo ...
BTW: Booting voyage-0.5 and 0.9.2 with lilo no problem (both system on
cf card) while only on alix ...
Any hints?
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
--
Regards,
Kim-man "Punky" Tse
* Open Source Embedded Solutions and Systems
- Voyage Linux (http://linux.voyage.hk)
- Voyage MPD (http://linux.voyage.hk/voyage-mpd)
- Voyage MuBox (http://mubox.voyage.hk)
* Voyage Store (http://store.voyage.hk)
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
