Hi Dava, Did you check the Policy Generation Level Parameter ? (in Policy Tab).
Regards On Tue, May 17, 2011 at 2:46 AM, David Durgee <[email protected]> wrote: > On Mon May 16 13:07:25 CDT 2011 Matthew Grooms wrote: > > >It works in my lab with the settings in the wiki document. I believe > >some folks on the list have stated there is a problem when modecfg is > >not used. I have yet to verify this. You should definitely upgrade your > >router to the latest available firmware. The stock firmware on some > >devices just won't work. > > They are using the latest firmware for the FVS328, which is V1.0.15 and > dated 12 July 2005. So what you refer to is unavailable for this hardware. > I have no control over the hardware as it belongs to a client and they have > no plans to replace working hardware. > > As I noted in my original message I am able to complete the initial phase > with the 2.1.7 > client but I am unable to open the tunnel. The NetGear client works fine > with this router, > so if that client were Windows 7 compatible I would not even bother to > consider changing > clients. But as it is NOT compatible and they insist on charging to > upgrade it I am looking > for an alternative. Your client appears to be my best hope. Any help > appreciated. > > Dave > > _______________________________________________ > vpn-help mailing list > [email protected] > http://lists.shrew.net/mailman/listinfo/vpn-help > >
_______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
