On 03/21/2012 09:20 PM, [email protected] wrote:
Yes, the Shrew client does work with XTM on firewall.
Make sure the XTM is the latest version because the prior versions had a
problem generating the .vpn file
Use the XTM UI to generate the .vpn file (or, you can use the WSM if you
have that installed)
I have it working at two of my locations.
-Greg
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Wednesday, March 21, 2012 2:35 PM
To: [email protected]
Subject: [vpn-help] Connecting to Watchguard from Linux v2.1.7
I'm using the above version of the Linux client to connect a Watchguard
client.
I got it from the main Ubuntu repository.
However, when ever I try to connect, the log window says:
config loaded for site 'work-vpn.vpn'
attached to key daemon ...
peer configured
iskamp proposal configured
esp proposal configured
client configured
local id configured
remote id configured
pre-shared key configured
bringing up tunnel ...
negotiation timout occurred
tunnel disabled
detached from key daemon ...
and then disconnects.
Hi Tom, what version of Ubuntu are you using? On Ubuntu 11.10, the
Shrew package (2.1.7) in the 11.10 repositories is broken.
The 2.1.5 version of Shrew from the Ubuntu 11.04 repositories works on
11.10 if you can figure out how to downgrade to it instead.
This is the Ubuntu bug report:
https://bugs.launchpad.net/ubuntu/+source/ike/+bug/860208
Starting at post #7 there are details of some workarounds (including
downgrading to 2.1.5).
_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help
