Hi, You use ModeConfig in your NETGEAR ?
Regards, On Thu, Mar 28, 2013 at 1:29 AM, Thor Carlson <[email protected]>wrote: > No luck. Policy Generation Level was initially set to auto, per the > configuration instructions. Available choices were auto, unique, require, > shared. All fail in the same fashion. On the Network tab, Security > Associations, Established - 0, Expired - 0, Failed - 2 > > Thanks for the response, what else can I check? > > Thor > > -----Original Message----- > From: Alexis La Goutte [mailto:[email protected]] > Sent: Tuesday, March 26, 2013 07:59 AM > To: [email protected] > Cc: [email protected] > Subject: Re: [vpn-help] Tunneled in but can't access server > > Hi, > > Please check the Policy Generation Level, must be set unique or require > (not auto) > > Regards, > > On Mon, Mar 25, 2013 at 4:23 PM, Thor Carlson <[email protected] > >wrote: > > > I'm having the same issue with my Netgear VPN Firewall. After you have > > established your tunnel, in the VPN connect window, will you please click > > the Network tab and look at Security Associations? I only get Failed, > > never Established or Expired. > > > > Thor > > > > > > -----Original Message----- > > From: Jansen, Tina [mailto:[email protected]] > > Sent: Tuesday, March 19, 2013 02:44 PM > > To: [email protected] > > Subject: [vpn-help] Tunneled in but can't access server > > > > Trying to set up a VPN with the shrew software. Client side is using > > windows 7. Server side is using Server 2008. FVS NETGEAR VPN/Firewall > > router. Have no problems tunneling in. Says tunnel connected. However, I > > cannot access the server or ping the server. Any ideas what I am missing > > here? > > > > Thank you > > Tina > > > > > > > > > > _______________________________________________ > > vpn-help mailing list > > [email protected] > > https://lists.shrew.net/mailman/listinfo/vpn-help > > > > >
_______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
