Any ideas, anyone?
On 23 July 2013 14:15, Goncalo Oliveira <[email protected]> wrote: > Hi there, > > We've been working with Cisco VPN Client 5.0 for some time, though, after > installing windows 8 this is not a stable option. So, Shrew came to the > rescue. The login to the VPN is made through group authentication, so the > configurations are as follows > > General > Remote host > Host name or IP address: our provider vpn host name > Auto configuration: ike config pull > Local host > virtual adapter > > Client > Firewall > NAT Traversal: enable > IKE fragmentation: enable > Other options > Enable dead peer detection: unchecked > > Name resolution > DNS, automatically > WINS off > > Authentication > Method: Mutual PSK + XAuth > Local identity > Identification type: Key identifier > Key ID string: our group name identifier > Remote identity > Identification type: any (also tried IP address) > Credentials > Pre shared key: our group password > > Phase1 > Exchange type: aggressive > DH Exchange: group 2 > > Phase 2 > PFS Exchange: group 2 (also tried auto and disabled) > > > > Phase 1 seems to go well, but phase 2 not so well, keeps writing 'config > resend event schedule'. > I'm attaching the iked.log, as there might be something useful there. > > Can anyone help me out on this? > > Thanks. > Best regards > > > -- > Gonçalo Oliveira > -- Gonçalo Oliveira
_______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
