What problems are you having with the Cisco client, and which version is it? 32-bit or 64-bit?
Regarding the Shrew client, have you tried setting the NAT traversal to 'force-rfc' ? From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Goncalo Oliveira Sent: Monday, July 29, 2013 7:23 AM To: [email protected]<mailto:[email protected]> Subject: Re: [vpn-help] Cisco VPN Any ideas, anyone? On 23 July 2013 14:15, Goncalo Oliveira <[email protected]<mailto:[email protected]>> wrote: Hi there, We've been working with Cisco VPN Client 5.0 for some time, though, after installing windows 8 this is not a stable option. So, Shrew came to the rescue. The login to the VPN is made through group authentication, so the configurations are as follows General Remote host Host name or IP address: our provider vpn host name Auto configuration: ike config pull Local host virtual adapter Client Firewall NAT Traversal: enable IKE fragmentation: enable Other options Enable dead peer detection: unchecked Name resolution DNS, automatically WINS off Authentication Method: Mutual PSK + XAuth Local identity Identification type: Key identifier Key ID string: our group name identifier Remote identity Identification type: any (also tried IP address) Credentials Pre shared key: our group password Phase1 Exchange type: aggressive DH Exchange: group 2 Phase 2 PFS Exchange: group 2 (also tried auto and disabled) Phase 1 seems to go well, but phase 2 not so well, keeps writing 'config resend event schedule'. I'm attaching the iked.log, as there might be something useful there. Can anyone help me out on this? Thanks. Best regards -- Gonçalo Oliveira -- Gonçalo Oliveira
_______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
