*Problem*: After initial installation and configuration of the VPN tunnel, Shrew Soft successfully connects and passes traffic to/from network devices. The tunnel connects rapidly.
After closing/disconnecting the tunnel, subsequent connections succeed, but slowly. After the tunnel is enabled, traffic will no longer pass. Quitting the Shrew Soft client, rebooting the PC, have no effect. *Workaround:* The only workaround discovered so far is to perform the following steps in sequence: 1) Open Network and Sharing Center in the Control panel. 2) Right click on the LAN connection, select 'properties', deselect the "Shrew Soft Lightweight Filter", click 'ok' to save. 3) Right click on the LAN Connection, select 'disable'. 4) Right click on the LAN Connection, select 'enable' 5) Right click on the LAN connection, select 'properties', select the "Shrew Soft Lightweight Filter", click 'ok' to save. *Environment*: Shrew Soft VPN Client (Std) 2.2.2 Windows 7 SP1 Dell OptiPlex 3010 Realtek PCIe GBE (Driver 5.810.1218.2012) Cisco SA500 Any suggestions would be appreciated.
_______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
