Thanks - that's exactly what I'm doing, so it's good to hear that it's sensible
From: Singh, Jasvinder [mailto:jasvinder.si...@intel.com] Sent: 13 October 2016 11:04 To: David Hotham Cc: vpp-dev@lists.fd.io Subject: RE: HQoS pipe profiles To avoid frequent changes in source code and compilations, you can add number of pipe profiles in the source code (right now, there is only profile and all pipes uses that profile). In run-time, you can assign new pipe profile to the any pipe using following CLI; set dpdk interface hqos pipe <if-name> subport <n> pipe <n> profile <n> or using binary API sw_interface_set_dpdk_hqos_pipe rx <intfc> | sw_if_index <id> subport <subport-id> pipe <pipe-id> profile <profile-id> From: vpp-dev-boun...@lists.fd.io<mailto:vpp-dev-boun...@lists.fd.io> [mailto:vpp-dev-boun...@lists.fd.io] On Behalf Of Singh, Jasvinder Sent: Wednesday, October 12, 2016 9:25 PM To: David Hotham <david.hot...@metaswitch.com<mailto:david.hot...@metaswitch.com>> Cc: vpp-dev@lists.fd.io<mailto:vpp-dev@lists.fd.io> Subject: Re: [vpp-dev] HQoS pipe profiles Hi David, Currently, there is no cli or binary API for changing the pipe profile. Thanks, Jasvinder From: vpp-dev-boun...@lists.fd.io<mailto:vpp-dev-boun...@lists.fd.io> [mailto:vpp-dev-boun...@lists.fd.io] On Behalf Of David Hotham via vpp-dev Sent: Wednesday, October 12, 2016 5:47 PM To: vpp-dev@lists.fd.io<mailto:vpp-dev@lists.fd.io> Subject: [vpp-dev] HQoS pipe profiles Am I right in thinking that currently the only way to configure pipe profiles is via the source code and recompiling?
_______________________________________________ vpp-dev mailing list vpp-dev@lists.fd.io https://lists.fd.io/mailman/listinfo/vpp-dev