Just updating.
Configuration in the LXC setup works fine.
Now all the three nodes (encap, transit and decap) works fine.
[0] ttl 0x3e node id 0x3 ts 0x1b0364ae
[1] ttl 0x3f node id 0x2 ts 0x1b0c2f8d
[2] ttl 0x40 node id 0x1 ts 0x1b04e395
Thank you so much again Shewtha.
Regards,
Hadi
From: HADI SHAIKHZAKER
Sent: Thursday, July 05, 2018 10:01 AM
To: 'Shwetha Bhandari (shwethab)' <[email protected]>; [email protected]
Cc: 井上 勝晴 <[email protected]>
Subject: RE: [vpp-dev] about iOAM configuration
Thanks Shewtha！
I am going to check the lxc setup.
https://github.com/CiscoDevNet/iOAM/tree/master/scripts/vpp_sandbox/example/simple-ip6
By the way in 17.04 there is no classification configuration for transit VPP.
So how that transit VPP understand which packet to rewrite and which not to.
I have tried 17.04 configuration in 18.04 VPP, but seems like as there is no
classification part,
“show errors ” counter in transit vpp doesn’t count up and also “show trace”
doesn’t shows the IP6_HOP_BY_HOP part.
Regards,
Hadi
From: Shwetha Bhandari (shwethab) [mailto:[email protected]]
Sent: Thursday, July 05, 2018 9:48 AM
To: HADI SHAIKHZAKER <[email protected]<mailto:[email protected]>>;
[email protected]<mailto:[email protected]>
Cc: 井上 勝晴 <[email protected]<mailto:[email protected]>>
Subject: Re: [vpp-dev] about iOAM configuration
Hi Hadi,
> set ioam rewrite trace-type 0x1f trace-elts 4 trace-tsp 1 node-id 0x1
> app-data 0x1234
To setup the node id and app-data that is needed on transit and decap you need
a trace profile configs:
Example: set ioam-trace profile trace-type 0x9 trace-elts 3 trace-tsp 2 node-id
0x2
I see that 17.04 had the working configs – this is not correct in 18.04 and
latest docs. I will fix the documentation in the latest.
Till then follow https://docs.fd.io/vpp/17.04/ioam_ipv6_doc.html.
Can you please try this:
https://github.com/CiscoDevNet/iOAM/tree/master/scripts/vpp_sandbox/example/simple-ip6
The scripts bring up lxc setup with 3 VPPs for encap, transit, decap along with
the necessary configs.
Thanks,
Shwetha
From: <[email protected]<mailto:[email protected]>> on behalf of HADI
SHAIKHZAKER <[email protected]<mailto:[email protected]>>
Date: Tuesday, July 3, 2018 at 1:21 PM
To: "[email protected]<mailto:[email protected]>"
<[email protected]<mailto:[email protected]>>
Cc: 井上 勝晴 <[email protected]<mailto:[email protected]>>
Subject: [vpp-dev] about iOAM configuration
Hi vpp-dev team,
I am trying to check the iOAM feature of VPP.
Do you have any working config sample for this?
I have checked the following url's and the configuration mentioned, was
sometimes rejected by the CLI or had no effect.
[URL1] https://docs.fd.io/vpp/18.04/ioam_plugin_doc.html
[URL2] https://docs.fd.io/vpp/17.04/ioam_ipv6_doc.html
I have 3 VPPs
2102:1100::100-->[Encap VPP]---->[Transit VPP]---->[Decap VPP]-->2102:3100::100
^this is the src host
^this one is the dst host
I have the following configuration for Encap Vpp
[Encap Vpp] *Want to add iOAM info to all the traffic towards 2102:3100::100
classify table miss-next ip6-node ip6-lookup mask l3 ip6 dst
classify session acl-hit-next ip6-node ip6-add-hop-by-hop table-index 0 match
l3 ip6 dst 2102:3100::100
set int input acl intfc GigabitEthernet1b/0/0 ip6-table 0
set ioam-trace profile trace-type 0x1f trace-elts 4 trace-tsp 1 node-id 0x1
app-data 0x1234
set ioam rewrite trace
Seems like it does encap the info I wanted
======================================
Trace results
[Encap Vpp]
IP6_HOP_BY_HOP: next index 12 len 72 traced 72 Trace Type 0x1f , 3 elts left
[0] ttl 0x0 node id 0x0 ingress 0x0 egress 0x0 ts 0x0
app 0x0
[1] ttl 0x0 node id 0x0 ingress 0x0 egress 0x0 ts 0x0
app 0x0
[2] ttl 0x0 node id 0x0 ingress 0x0 egress 0x0 ts 0x0
app 0x0
[3] ttl 0x40 node id 0x1 ingress 0x3 egress 0x1 ts 0x5efba500 <---- I
think this one is working fine
app 0x1234
The problem I am facing is, configuration for VPP 18.04 as mentioned in the URL
"set ioam rewrite trace-type 0x1f trace-elts 4 trace-tsp 1 node-id 0x1 app-data
0x1234"
Is being rejected by the cli, so I have changed it as mentioned above.
vpp# set ioam rewrite trace-type 0x1f trace-elts 4 trace-tsp 1 node-id 0x1
app-data 0x1234
unknown input `-type 0x1f trace-elts 4 trace-...'
There are some other problems also, like “node” is also rejected by cli, so I
used ip6-node and this one works
vpp# classify table miss-next node ip6-lookup mask l3 ip6 dst
classify table: Mask required
vpp# classify table miss-next ip6-node ip6-lookup mask l3 ip6 dst
vpp#
And url also showing that this config is required for transit and decap VPP
also.
So do any one have any working configuration for iOAM?
Regards,
Hadi
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#9782): https://lists.fd.io/g/vpp-dev/message/9782
Mute This Topic: https://lists.fd.io/mt/23024218/21656
Group Owner: [email protected]
Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
