I think I understand the problem now, but I don’t understand your last point. 
Does vpp send a map-reply and if yes, does it look okay?

If it does not, we’re back to my first question about syslog. 

Florin

> On Jan 31, 2019, at 11:49 AM, Yosvany <[email protected]> wrote:
> 
>  
> Again, do you see any error in /var/log/syslog for vni 0? 
>  
> ·         I nedd to check.
>  
> And do you mean that the map-reply from vpp to cisco router is not accepted 
> in the cisco router?
>  
> ·         This is the problem. 
>                     
>                                
>  
>  
>                                 Cisco MR/MS – (Can see information about 
> registration of VPP and Cisco Xtr)
>  
>  
>  
> VPP xTr        --------------------------------------     Cisco xTR
>  
> Can see the RLOC CiscoXTR                         I cant see any Information
> Show one eid-table remote
>  
> Conclusion: Cisco XTR receive a bad Map-Reply from VPP.
>  
> ·         Another problem is that VPP is making a Loop sending    map-request 
> to  MR/MS. In this map-request can se a map-reply.
>  
>  
> De: Florin Coras [mailto:[email protected] 
> <mailto:[email protected]>] 
> Enviado el: jueves, 31 de enero de 2019 6:13
> Para: yosvany <[email protected] <mailto:[email protected]>>
> Asunto: Re: [vpp-dev] VPP send map-register with R=0 on LISP
>  
> Again, do you see any error in /var/log/syslog for vni 0? 
>  
> And do you mean that the map-reply from vpp to cisco router is not accepted 
> in the cisco router?
>  
> Florin
>  
> 
> On Jan 30, 2019, at 1:41 PM, yosvany <[email protected] 
> <mailto:[email protected]>> wrote:
>  
> We need use wireshark to compare replys and request.
>  
>  
> What about /var/log/syslog? Do you have any lisp specific errors there?
>  
> Seems that you have v6 traffic going for vni 10. Did you statically configure 
> the mapping for fd00:74::/48? If not, then map-replies with vni non 0 seem to 
> be working.    
>  
> ·         fd00:74::/48 is local eid statically configured. Map replies only 
> work from cisco router as xtr when vni is different that 0
>  
> What map-reply isn’t correctly parsed? Is it for the v4 eid in vni 10 or for 
> the v4 in vni 20?
>  
> ·         Only work vni 10 this is cisco router, xtr vpp isn’t correctly 
> parsed  [10] fd00:0:76::/48                remote              192.168.76.60  
>                1440           
>  
>  
> Florin
>  
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> 
> View/Reply Online (#12109): https://lists.fd.io/g/vpp-dev/message/12109 
> <https://lists.fd.io/g/vpp-dev/message/12109>
> Mute This Topic: https://lists.fd.io/mt/29613581/675152 
> <https://lists.fd.io/mt/29613581/675152>
> Group Owner: [email protected] <mailto:[email protected]>
> Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub 
> <https://lists.fd.io/g/vpp-dev/unsub>  [[email protected] 
> <mailto:[email protected]>]
> -=-=-=-=-=-=-=-=-=-=-=-

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12110): https://lists.fd.io/g/vpp-dev/message/12110
Mute This Topic: https://lists.fd.io/mt/29613748/21656
Group Owner: [email protected]
Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub  [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

Reply via email to