Hoi Petr, others, Petr, in case you were interested to take a look -- I became a bit less lazy and started VPP in a debugger, and added a breakpoint in the vnet_hw_interface_add_del_mac_address function.
DBGvpp# create sub HundredGigabitEthernet15/0/0 10 HundredGigabitEthernet15/0/0.10 DBGvpp# show int Name Idx State MTU (L3/IP4/IP6/MPLS) Counter Count GigabitEthernet5/0/0 1 down 9000/0/0/0 GigabitEthernet5/0/1 2 down 9000/0/0/0 GigabitEthernet5/0/2 3 down 9000/0/0/0 GigabitEthernet5/0/3 4 down 9000/0/0/0 HundredGigabitEthernet15/0/0 5 down 9000/0/0/0 HundredGigabitEthernet15/0/0.10 7 down 0/0/0/0 HundredGigabitEthernet15/0/1 6 down 9000/0/0/0 local0 0 down 0/0/0/0 DBGvpp# set interface ip address HundredGigabitEthernet15/0/0.10 192.0.2.1/30 <break> This is the call stack: #0 vnet_hw_interface_add_del_mac_address (vnm=0x7ffff7f42ec0 <vnet_main>, hw_if_index=0, mac_address=0x7fff513e87f0 "\001", is_add=1 '\001') at /home/pim/src/vpp/src/vnet/interface.c:1580 #1 0x00007ffff77a8b46 in mfib_itf_mac_add_del (itf=0x7fff9c6710c0, pfx=0x7fff97c69bcc, add=1) at /home/pim/src/vpp/src/vnet/mfib/mfib_itf.c:167 #2 0x00007ffff77a8ad2 in mfib_itf_mac_add (itf=0x7fff9c6710c0, pfx=0x7fff97c69bcc) at /home/pim/src/vpp/src/vnet/mfib/mfib_itf.c:176 #3 0x00007ffff77ac6a5 in mfib_entry_path_update (mfib_entry_index=1, source=MFIB_SOURCE_SPECIAL, rpaths=0x7fff97e0ceb0) at /home/pim/src/vpp/src/vnet/mfib/mfib_entry.c:1070 #4 0x00007ffff77b353c in mfib_table_entry_paths_update_i (fib_index=0, prefix=0x7ffff7d096e0 <ip4_specials>, source=MFIB_SOURCE_SPECIAL, entry_flags=MFIB_ENTRY_FLAG_NONE, rpaths=0x7fff97e0ceb0) at /home/pim/src/vpp/src/vnet/mfib/mfib_table.c:319 #5 0x00007ffff77b31f9 in mfib_table_entry_path_update (fib_index=0, prefix=0x7ffff7d096e0 <ip4_specials>, source=MFIB_SOURCE_SPECIAL, entry_flags=MFIB_ENTRY_FLAG_NONE, rpath=0x7fff513e89c0) at /home/pim/src/vpp/src/vnet/mfib/mfib_table.c:337 #6 0x00007ffff779bbd1 in ip4_mfib_interface_enable_disable (sw_if_index=7, is_enable=1) at /home/pim/src/vpp/src/vnet/mfib/ip4_mfib.c:158 #7 0x00007ffff720aeec in ip4_add_del_interface_address_internal (vm=0x7fff96800680, sw_if_index=7, address=0x7fff513e8dd8, address_length=30, is_del=0) at /home/pim/src/vpp/src/vnet/ip/ip4_forward.c:807 #8 0x00007ffff720a1f1 in ip4_add_del_interface_address (vm=0x7fff96800680, sw_if_index=7, address=0x7fff513e8dd8, address_length=30, is_del=0) at /home/pim/src/vpp/src/vnet/ip/ip4_forward.c:839 #9 0x00007ffff72017e5 in add_del_ip_address (vm=0x7fff96800680, input=0x7fff513e9e40, cmd=0x7fff97b5c518) at /home/pim/src/vpp/src/vnet/ip/ip46_cli.c:171 in mfib_itf_mac_add_del(), itf->mfi_sw_if_index==7 (this is the index of the just created sub-int), the lookup in line 166 yields si->hw_if_index == 0, which is then passed on to the vnet_hw_interface_add_del_mac_address() call, provoking the error, because I think it references phy sw index 0 (interface local0)? DBGvpp# show mfib interface mFIB interfaces:: 0@ HundredGigabitEthernet15/0/0.10: Accept, 1@ HundredGigabitEthernet15/0/0.10: Accept, Curiously, I would've expected si->hw_if_index to be 5, from mfi_sw_if_index==7. I'm a bit out of my depth here, so I'll have to defer to others who are more knowledgeable. groet, Pim On Mon, Jan 17, 2022 at 10:25 AM Pim van Pelt <p...@ipng.nl> wrote: > Hoi, > > I have seen that message, but it is not related to the Linux CP > plugin, and it seems benign -- that is to say, Linux CP and VPP work just > fine even though the error is emitted. > Without Linux CP enabled, the same message appears when adding an IP > address to a sub-int. I didn't look in to it very long, but the error is > emitted in src/vnet/interface.c:1583 for > function vnet_hw_interface_add_del_mac_address() which occurs only in a few > places: > > src/plugins/lldp/lldp_cli.c: vnet_hw_interface_add_del_mac_address > (lm->vnet_main, > src/plugins/lldp/lldp_cli.c: vnet_hw_interface_add_del_mac_address > (lm->vnet_main, > src/plugins/vrrp/vrrp.c: error = vnet_hw_interface_add_del_mac_address > src/vnet/interface_api.c: error = vnet_hw_interface_add_del_mac_address > (vnm, hi->hw_if_index, > src/vnet/mfib/mfib_itf.c: vnet_hw_interface_add_del_mac_address > (vnet_get_main(), > src/vnet/bonding/device.c: error = > vnet_hw_interface_add_del_mac_address (vnm, s_hi->hw_if_index, > src/vnet/bonding/device.c: vnet_hw_interface_add_del_mac_address > (vnm, s_hi->hw_if_index, > src/vnet/bonding/cli.c: vnet_hw_interface_add_del_mac_address (vnm, > s_hwif->hw_if_index, > src/vnet/interface_cli.c: vnet_hw_interface_add_del_mac_address (vnm, > si->hw_if_index, mac, is_add); > > If you're curious, you could take a look at these call sites. One other > place you might look is ip6_add_del_interface_address() > and ip4_add_del_interface_address() which are the functions that get called > when you issue the CLI 'set interface ip address' command. > > But it would also be okay to ignore the error for now -- maybe others have > a recollection of how vnet_hw_interface_add_del_mac_address() does its > business. > > groet, > Pim > > On Mon, Jan 17, 2022 at 9:27 AM Petr Boltík <petr.bol...@gmail.com> wrote: > >> Hello, >> >> did you notice this error message from systemctl? >> >> Message from systemctl status vpp-dataplane: >> vnet[2526]: interface: hw_add_del_mac_address: >> vnet_hw_interface_add_del_mac_address: Secondary MAC Addresses not >> supported for interface index 0 >> Jan 17 03:16:05 stredni vnet[2526]: interface: hw_add_del_mac_address: >> vnet_hw_interface_add_del_mac_address: Secondary MAC Addresses not >> supported for interface index 0 >> >> Vpp run in separated netns. Latest vpp v22.02-rc0~503-gf8dd9d8af. Message >> is related to ip address configuration on vlan subinterface. >> >> Config below... >> >> Regards Petr >> >> #!/bin/sh >> vppctl lcp default netns controlplane >> vppctl lcp lcp-sync on >> vppctl lcp lcp-auto-subint on >> vppctl set interface mtu packet 1500 enp3s0 >> vppctl lcp create enp3s0 host-if enp3s0 >> vppctl set interface state enp3s0 up >> vppctl create sub enp3s0 10 >> vppctl set interface ip address enp3s0.10 192.168.18.1/24 >> vppctl set interface state enp3s0.10 up >> >> >> pá 14. 1. 2022 v 17:42 odesílatel Petr Boltík via lists.fd.io >> <petr.boltik=gmail....@lists.fd.io> napsal: >> >>> Hi, >>> Yes, I have tested the latest code that includes >>> https://gerrit.fd.io/r/c/vpp/+/33709. Test: >>> "lcp lcp-sync on" => everything work fine >>> "lcp lcp-sync off" => issue appears >>> >>> Here is a video with an example >>> https://youtu.be/wwyXyVilvOk >>> >>> Regards >>> Petr >>> >>> pá 14. 1. 2022 v 16:59 odesílatel Pim van Pelt <p...@ipng.nl> napsal: >>> >>>> Hoi Petr, >>>> >>>> We merged a relevant VPP -> Linux interface sync change in >>>> https://gerrit.fd.io/r/c/vpp/+/33709 just this week. >>>> The code that does this sync is in lcp_interface_sync.c:100 >>>> and lcp_interface.c:1004. >>>> Does your build include that code, and did you issue "lcp lcp-sync on" ? >>>> >>>> >>>> On Fri, Jan 14, 2022 at 3:34 PM Petr Boltík <petr.bol...@gmail.com> >>>> wrote: >>>> >>>>> Hello, >>>>> I have found a cosmetic issue with a linux-cp TAP device (tested both >>>>> plugins - original and patched linux-cp 31122 ). If you try to add >>>>> multiple >>>>> LCP TAP interfaces, sometimes there is bug in "vppctl show interface" >>>>> output. MTU at the TAP is randomly shown incorrectly like: >>>>> tap10 11 up 4/0/0/0 >>>>> tap18 19 up 1500/0/0/0 >>>>> tap26 27 up 9216/0/0/0 >>>>> >>>>> MTU 1500 pass to the control plane successfully and MTU inside netns >>>>> is correct. Test script below, you may run it a few times to see an issue. >>>>> I have run it inside netns "controlplane". Tested 21.10 and >>>>> 22.02-rc0~347-g5dec92de6. >>>>> >>>>> Regards >>>>> Petr >>>>> >>>>> #!/bin/bash >>>>> vppctl lcp default netns controlplane >>>>> for i in $(seq 1 30); do >>>>> vppctl create loopback interface instance $i >>>>> vppctl set interface mtu packet 1500 loop$i >>>>> vppctl lcp create loop$i host-if br$i >>>>> vppctl set interface state loop$i up >>>>> done >>>>> >>>>> >>>>> >>>>> >>>>> >>>> >>>> -- >>>> Pim van Pelt <p...@ipng.nl> >>>> PBVP1-RIPE - http://www.ipng.nl/ >>>> >>> >>> >>> >>> > > -- > Pim van Pelt <p...@ipng.nl> > PBVP1-RIPE - http://www.ipng.nl/ > -- Pim van Pelt <p...@ipng.nl> PBVP1-RIPE - http://www.ipng.nl/
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#20735): https://lists.fd.io/g/vpp-dev/message/20735 Mute This Topic: https://lists.fd.io/mt/88421552/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-