On Wed, Apr 27, 2005 at 03:22:34PM +1200, Michal Ludvig wrote: > Herbert Poetzl wrote: > > > - the tools (util-vserver 0.30.206, + dietlibc 0.28+patches) > > emit some stuff, do some things, whatever .. which 'disturbes > > the X keyboard ... (unlikely, but possible) > > > > * make sure that the tools are the latest and dietlibc is > > (patched on x86_64) > > Where can I get the patch? I'm using plain dietlibc 0.28 on amd64
patch is in the src rpm (if necessary use alien) http://vserver.13thfloor.at/Experimental/MDK/dietlibc-0.28-1.src.rpm > > * check by starting the vserver from a different host > > (logged on via ssh, and maybe telnet) > > Over ssh it works with no problems. However e.g. locally from screen it > still dies. > > > - the init inside the vserver does something which manages > > to confuse the X keyboard (would be an isolation issue) > > > > * try to replace the init with an minit or a different init > > Replaced with debian woody statically linked init and still the same. > > > * replace the init by an strace wrapper to dump the syscalls > > > > - there is an unwanted 'connection' between the X (on the host) > > and the vserver which really should not be there > > > > * check for device nodes in /dev and various other places > > * verify that no 'magic' keys are copied from the host > > What do you mean with magic keys? > > > * look for pipes (fifos) which run between host and guest > > It is a fresh SL92 vserver, almost no extra config done. There should be > no such fifos. > > However... I stripped down /etc/rc.d/rc to just running sshd and exit. > Still the same. Subsequent vserver halting from the master looks like this: > > root:~ # vserver popelka stop > vkill: vc_ctx_kill(): No such process > Vserver '/usr/local/etc/vservers/popelka' still running unexpectedly; > please investigate it manually... > root:~ # vserver popelka stop > vserver 'popelka' is not running > > Once I exit the dead X session (running e.g. on tty7) I still can't use > the keyboard. I must ssh from a different host and with "chvt 1" switch > the console. Only after that I could use the keyboard again. When going > back to tty7 I can see some binary garbage after "INIT: no more > processes left in this runlevel". > > Not too much of success... problem is solved ... info later ... best, Herbert > Michal Ludvig > -- > * Personal homepage: http://www.logix.cz/michal > _______________________________________________ > Vserver mailing list > [email protected] > http://list.linux-vserver.org/mailman/listinfo/vserver _______________________________________________ Vserver mailing list [email protected] http://list.linux-vserver.org/mailman/listinfo/vserver
