I am running VServer guests on iSCSI targets, wich gives me a bit of a problem when using quota's.
I all the howto's you need to make a blockdevice and copy it into the /dev directory of the guest.
Since my targets come from iSCSI i can't do that. The only exists in the /dev directory of the host.
I made a failover solution where /etc/vservers is mounted over NFS so all hosts kan access this data.
All these hosts have access to all the iSCSI targets, so i can start any guest on any host. This is great when you want failover.
The control panel i am using (DirectAdmin) requires that you have quotas in order to calculate the diskusage.
In the fstab file of my guests i have i line like:
/dev/emc_61 / ext3 rw,noatime,usrquota 0 0
In this case /dev/emc_61 is the iSCSI target.
Any suggestions?
Met vriendelijke groet,
Wido den Hollander
PCextreme technische dienst
Telefoon: 020-5060100
Fax: 020-4470944
E-mail: [EMAIL PROTECTED]
Internet: http://www.pcextreme.nl
Antwoorden op veel vragen vindt u in onze handleiding op:
http://handleiding.pcextreme.nl/
_______________________________________________ Vserver mailing list [email protected] http://list.linux-vserver.org/mailman/listinfo/vserver
