Hi, I have Two cisco Switchs 2950 sw1 & sw2 with a vtp link (802.1q trunk). sw1 is the vtp server and sw2 is the vtp client. The two switchs have 3 vlans: Vlan101, Vlan 102 and vlan 103 and the vlans can't communicate because there is no routing between them. I decide to use vyatta to implement routing inter-vlans. So I have a Vyatta VM that i linked to a port of sw1 and i configured this port as trunk in the sw1 side (switchport mode trunk). I also create 3 vif (sub interface of my vyatta interface eth0), so now i have eth0.vif101, eth0.vif102 and eth0.vif103. with this configuration machines on a vlan can't communicate with machines on an other vlan: what do i have to do on my vyatta to activate intervlan routing.
Thanks for your help --
_______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users
