Thanks Aubrey! It works now. On Nov 29, 2007 3:08 PM, Aubrey Wells <[EMAIL PROTECTED]> wrote:
> log in to the system from the livecd as root and use fdisk to delete all > the partitions on the disk. > This is from memory, but the command/output should be something like: > # fdisk /dev/sda > Command (m for help): d > partition number : 1 > Command (m for help): d > partition number: 2 > Command (m for help): d > Command (m for help): w > Command (m for help) q > > Keep using the "d" command and then picking numbers until it stops asking > for partition numbers and you should have a clean disk that Vyatta can > install to. > > Then try again. Be aware that this will destroy all data on the disk, so > if you need anything off that disk first, take a backup now... > > > * > * > *------------------* > *Aubrey Wells* > *Senior Engineer* > Shelton | Johns Technology Group > A Vyatta Ready Partner > www.sheltonjohns.com > > > > > On Nov 29, 2007, at 3:03 PM, Philippe Marcais wrote: > > Hello, > > I'm trying to install it from liveCD to hard drive but I got the following > error (see below). I'm not a linux expect, so if someone can help here that > would be great. > > Thanks, > Philippe > > Welcome to the Vyatta install program. This script > will walk you through the process of installing the > Vyatta image to a local hard drive. > > Would you like to continue? (Yes/No) [Yes]: > Probing drives: OK > The Vyatta image will require a minimum 450MB root > partition and a minimum 10MB configuration partition. > Would you like me to try to partition a drive automatically > or would you rather partition it manually with parted? If > you have already setup your partitions, you may skip this step. > > Partition (Auto/Parted/Skip) [Auto]: > > I found the following drives on your system: > sda 61000MB > sdb 129MB > > > Install the image on? [sda]: > > This will destroy all data on /dev/sda. > Continue? (Yes/No) [No]: Yes > > Cannot mount /dev/sda2. > Please see install.log for more details. > Exiting.. > Branch-vyatta-1:~# more install.log > turning off swaps... > Removing partition 1 on /dev/sda > Cannot mount /dev/sda2. > mount /dev/sda2 /mnt/tmp > Exiting... > /dev/sda2 looks like swapspace - not mounted > mount: you must specify the filesystem type > Branch-vyatta-1:~# > > _______________________________________________ > Vyatta-users mailing list > Vyatta-users@mailman.vyatta.com > http://mailman.vyatta.com/mailman/listinfo/vyatta-users > > >
_______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users
