One other thing to look into... Make sure you're not using the RAID functionality of the SIS964.
Robert Bays wrote: > Stefan, > > Looks like grub isn't loading stage 1.5. One thing to check... In the > BIOS there may be a setting that switches the disk mode from normal to > LBA. It should be set to LBA... > > Cheers, > Robert. > > Stefan Leippert wrote: >> Hello List, >> trying to install Vyatta community edition 3, installation suceeded ok, but >> booting hangs: >> >> GRUB Loading stage1.5 >> GRUB loading, please wait. >> >> Then nothing more happens. >> >> I tried following things: >> loaded new image and installed from this. >> tried different harddisks SATA and PATA. >> >> before install-system, I tried "dd </dev/zero >/dev/hda count=1", but >> doesnt't help. >> >> Hardware is a small Barebone-PC with SIS964, Intel Celeron 220, 512 MB RAM. >> >> Found some strange messages in /var/log/messages, when booting again from >> CD. >> >> vyatta kernel: copy_e820_map() start 0000... size 000009fc00 end 9fc00 type: >> 1 >> .... >> Enabling APIC mode: Flat: Using 0 I/O APICs >> BIOS bug, no explicit IRQ entries using default mptable >> .... >> Cannot allocate resource for EISA slot 1 >> Cannot allocate resource for EISA slot 2 >> hdb: _NEC DV-5800, Atapi CD/DVD-ROM >> ide0 at 0x1f0-0x1f7, 0x3f6 on irq 14 >> ATA: abnormal status 0x7F on port 0x2367 >> Registering unionfs 2.0 >> agpgart: Unuspported SiS chipset (device id: 0662) >> >> >> Any tips or information ? >> >> >> >> > _______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users
