Temperature does affect the hardening process, maybe if you would warm the
wraps very gently with a hair drier it would help set it. I always put mine
in a heat cabinet no matter the time of year.
Dell
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, December 14, 2000 6:24 PM
Subject: Flex coat question
> Hey guys, I am in a bit of a jam. I have to deliver a custom rod on Sat
and my Flex Coat is making my life difficult. My first coats went on okay
but my secon are either tacky or really slow to cure. I know this is a
chemical reaction vs. heat but does cold weather slow the process down? It
has been chilly here in Eastern, WA this week.
>
> I am going to try putting a very, very light coat on the tacky wraps
tonight in hope that maybe my mixture was off or didn't get mixed all the
way last time. If this fails, any ideas on what to do? I have read some
people using products like Hard as Nails to force tacky Flex Coat to cure
but have no experience in this. It is a special Christmas present for this
family to their son so I need to get it done ASAP.
>
> Thanks,
>
> Mike
> Spangle, WA
>
>
