Try printer setup repair Tiger edition. Trial available. (google it for download site). It rules for this stuff. (my guess is a permissions issue).
On 12/3/06 4:21 PM, "Severin Crisp" <[EMAIL PROTECTED]> wrote: > I recently replaced my G4/400 with a G5 1.8 (thanks Rod!!) and > everything is transferred and is working fine except printer sharing > an Epson SP720 with my wife's G3 iMac. This worked flawlessly and > was easily set up with the G4. Both the G5 and the G3 are running > 10.4.5 and are connected by ethernet via a DSL-504 ADSL router. File > sharing works perfectly. I duly set up printer sharing on the G5 and > the first time printing was tried from the iMac it hung at Page > Setup. I realised that I had not reidentified the printer, now it > lives on SevsG5 not SevsG4. I have cleared and reset everything in > sight but still no joy. Page setup gets as far as viewing shared > printers and the correct printer then the spinning ball of death > appears and only a Force Quit gets out of it. I suspect there is a > preference or similar file that is corrupted but am not sure where to > go from here. > Suggestions welcomed > Severin Crisp > ________________________________________________________ > > Assoc Professor R Severin Crisp, FIP, CPhys, FAIP > 15 Thomas St, Mount Clarence, Albany, 6330, Western Australia. > Phone (08) 9842 1950 (Int'l +61 8 9842 1950) > email mailto:[EMAIL PROTECTED] > Web pages http://www.JennyCrisp.com.au > & http://members.westnet.com.au/Crisp > ________________________________________________________ > > > > -- The WA Macintosh User Group Mailing List -- > Archives - <http://www.wamug.org.au/mailinglist/archives.shtml> > Guidelines - <http://www.wamug.org.au/mailinglist/guidelines.shtml> > Unsubscribe - <mailto:[EMAIL PROTECTED]> >