Hi Leon,

thanks for your suggestions.

I read  /Postfix-Cyrus-Web-cyradm-HOWTO and i think that i followed all trips Luc wrote down there.
The following are my config files:

****** /etc/cyrus.conf ********

# UNIX sockets start with a slash and are put into /var/lib/imap/socket
SERVICES {
 # add or remove based on preferences
 imap        cmd="imapd" listen="xxx.xxx.xxx.xxx:imap" prefork=0
 imaplocal    cmd="imapd -C /etc/imapd-local.conf" listen="127.0.0.1:imap" prefork=0
 imaps        cmd="imapd -s" listen="xxx.xxx.xxx.xxx:imaps" prefork=0
 imapslocal    cmd="imapd -C /etc/imapd-local.conf" listen="127.0.0.1:imaps" prefork=0
 pop3        cmd="pop3d" listen="pop3" prefork=0
 pop3s        cmd="pop3d -s" listen="pop3s" prefork=0
 #sieve    cmd="timsieved" listen="sieve" prefork=3 maxchild=10
 sieve         cmd="timsieved" listen="xxx.xxx.xxx.xxx:sieve" prefork=0
 sievelocal    cmd="timsieved -C /etc/imapd-local.conf" listen="127.0.0.1:sieve" prefork=0

## Note: xxx.xxx.xxx.xxx is a replace of my server IP address

****** /etc/imapd.conf ********

postmaster: postmaster
configdirectory: /var/lib/imap
partition-default: /var/spool/imap
sievedir: /var/lib/imap/sieve
sieveuserhomedir: no
# admins: noadmins
allowanonymouslogin: no
allowplaintext: yes
autocreatequota: 200000
reject8bit: no
quotawarn: 90
timeout: 30
poptimeout: 10
dracinterval: 0
drachost: localhost
sasl_pwcheck_method: saslauthd
#sasl_pwcheck_method: auxprop
lmtp_overquota_perm_failure: no
sasl_mech_list: md5
servername: myhost.mydom.dom
sieve_maxscriptsize: 32
sieve_maxscript: 5
unixhierarchysep: yes
lmtpsocket: /var/spool/postfix/public/lmtp
sendmail: /usr/sbin/sendmail

****** /etc/imapd-local.conf ********

postmaster: postmaster
configdirectory: /var/lib/imap
partition-default: /var/spool/imap
sievedir: /var/lib/imap/sieve
sieveuserhomedir: no
admins: cyrus
allowanonymouslogin: no
allowplaintext: yes
autocreatequota: 200000
reject8bit: no
quotawarn: 90
timeout: 30
poptimeout: 10
dracinterval: 0
drachost: localhost
sasl_pwcheck_method: saslauthd
#sasl_pwcheck_method: auxprop
lmtp_overquota_perm_failure: no
sasl_mech_list: md5
servername: myhost.mydom.dom
sieve_maxscriptsize: 32
sieve_maxscript: 5
unixhierarchysep: yes
lmtpsocket: /var/spool/postfix/public/lmtp
sendmail: /usr/sbin/sendmail

****** /etc/pamd/imap ********

#%PAM-1.0
auth sufficient /lib/security/pam_pgsql.so
#auth sufficient /lib/security/pam_unix_auth.so
account required /lib/security/pam_pgsql.so
#account sufficient /lib/security/pam_unix_acct.so

## Note: I copied /etc/pam.d/imap in /etc/pamd.d/pop,  /etc/pamd.d/sieve, /etc/pamd.d/cyrus so they are all twins files.

pam_pgsql.so calls web-cyradm postgresql db to authenticate users. The md5 crypting type works great with web-cyradm

If I telenet on localhost to port sieve i got the following:

telnet localhost sieve
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
"IMPLEMENTATION" "Cyrus timsieved v2.2.8"
"SIEVE" "fileinto reject envelope vacation imapflags notify subaddress relational regex"
OK

if i run sieveshell i got:

/usr/bin/sieveshell -u cyrus -a cyrus 127.0.0.1
connecting to 127.0.0.1
unable to connect to server at /usr/bin/sieveshell line 169

I read a lot of howtos and mailing list  but i cannot find the way to solve the problem.
Any idea is very wellcome!!

Thanks in  advance to all.

Socio

[EMAIL PROTECTED] wrote:
Hi,
Look carefully to the /etc/cyrus.conf (here is the Lucs' manual - http://tldp.org/HOWTO/Postfix-Cyrus-Web-cyradm-HOWTO/cyrus-config.html#CYRUS-CONFIGFILES).
You can see below "sievelocal" line:
# UNIX sockets start with a slash and are put into /var/imap/socket
SERVICES {
  # add or remove based on preferences
  imap          cmd="imapd" listen="192.168.0.1:imap" prefork=0
  imaplocal     cmd="imapd -C /etc/imapd-local.conf" listen="127.0.0.1:imap" prefork=0
  imaps         cmd="imapd -s" listen="192.168.0.1:imaps" prefork=0
  imapslocal    cmd="imapd -C /etc/imapd-local.conf" listen="127.0.0.1:imaps" prefork=0
  pop3          cmd="pop3d" listen="pop3" prefork=0
  pop3s         cmd="pop3d -s" listen="pop3s" prefork=0
  sieve         cmd="timsieved" listen="192.168.0.1:sieve" prefork=0
  sievelocal    cmd="timsieved -C /etc/imapd-local.conf listen="127.0.0.1:sieve" prefork=0 

Don't forget to create /etc/imapd-local.conf (look in the same page, the link is above).

Regards,
Leon Kolchinsky

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Gianni Socionovo
Sent: Friday, September 09, 2005 11:26 AM
To: [email protected]
Subject: Re: [Web-cyradm] sieve problem

Hi Leon,

Sorry but i saw your reply just now.

I copied /etc/pam.d/imap to /etc/pam.d/sieve.

I checked cyrus.conf and i found the entries for sieve but not the sievelocal one.
And I didn't find any reference about sievelocal in Luc's Howtos.
What about it?

Thanks and Regards.
________________________________

From: [EMAIL PROTECTED]
<http://www.web-cyradm.org/mailman/listinfo/web-cyradm>lkolchin at univ.haifa.ac.il <mailto:web-cyradm%40web-cyradm.org?Subject=%5BWeb-cyradm%5D%20sieve%20problem&In-Reply-To=>
Sent: Mon 29.08.2005 20:28
To: web-cyradm at web-cyradm.org
<http://www.web-cyradm.org/mailman/listinfo/web-cyradm>
Subject: [Web-cyradm] sieve problem

**
/Mon Aug 29 20:28:49 CEST 2005/

Hello,

Did you copy the /etc/pam.d/imap to /etc/pam.d/sieve?
Do you have entries for sieve and sievolocal in cyrus.conf like in Lucs' 
HOWTO?

If not, just add this stuff to the apropriate files.

Regards,
Leon Kolchinsky

________________________________

From: web-cyradm-bounces at web-cyradm.org <http://www.web-cyradm.org/mailman/listinfo/web-cyradm> on behalf of Gianni Socionovo
Sent: Mon 29.08.2005 12:46
To: web-cyradm at web-cyradm.org
<http://www.web-cyradm.org/mailman/listinfo/web-cyradm>
Subject: [Web-cyradm] sieve problem



Hi guys,

i try to test sieve on my Cyrus-Imap plu web-cyradm environment, but it seem that it shoudn't work.

when i run the command:

sivtest -u cyrus -a cyrus localhost

i got the message:

S: "IMPLEMENTATION" "Cyrus timsieved v.2.2.8"
S: "SIEVE" "fileinto reject envelope vacation imapflags notify subaddress relational regexp"
S: OK
Authentication failed. generic failure
Security strength factor: 0.

thnks for any help.

regards

Socio

_______________________________________________
This mailing list is hosted and supported by bit-heads GmbH | http://www.bit-heads.ch

_______________________________________________
Web-cyradm mailing list
Web-cyradm at web-cyradm.org
<http://www.web-cyradm.org/mailman/listinfo/web-cyradm>
http://www.web-cyradm.org/mailman/listinfo/web-cyradm


-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 4475 bytes
Desc: not available
Url : 
http://fix.bitheads.ch/pipermail/web-cyradm/attachments/20050829/edc4a60c/attachment.bin

  

--
_________________________________________________
Gianni Socionovo
E-Business Manager
MEP S.p.A.
Via Papa Giovanni XXIII, 49
61045 Pergola (PU)
ITALY
email: [EMAIL PROTECTED]
Web Page: http://www.mepsaws.com
Tel. +39 0721 737260
FAx. +39 0721 734533
_______________________________________________
This mailing list is hosted and supported
by bit-heads GmbH | http://www.bit-heads.ch

_______________________________________________
Web-cyradm mailing list
[email protected]
http://www.web-cyradm.org/mailman/listinfo/web-cyradm

Reply via email to