Hello Frederic, hello Bill,
very good news: It works great and my test values Outside Temperature and
Humidity are represented by index.html.
I am happy!
It was due to the [[label_map]] incorrect mapping problem solved.
Thank you very much !!!!
Franz
Am Donnerstag, 24. Mai 2018 17:51:52 UTC+2 schrieb Wysiwyg:
>
> Hi Franz,
>
> It's also pretty frustrating for us to that we cannot find :(, but let's
> try again !
>
> I see 2 things that may help or at least rise some questions :
>
> 1/
> in label map you have: [[label_map]]
> HUMT = outTemp
>
> if you use my version of driver, This mean the MQTT topic shall look like
> this: weewx/HUMT
>
> but in the mean time in mosquitto sub I see:
>
> Client mosqsub|1398-raspberryp received PUBLISH (d0, q0, r0, m0,
> 'weewx/outTemp', ... (4 bytes))
>
>
> I'm not sure it cause the crash, because, as far as I remember, the driver
> shall just ignore the unknown topics (for example if you publish in
> weewx/spiderman, it shall be ignored by the driver) (it may need to be
> checked)
>
>
>
> 2/ I'm not sure at all, but I'm confused by the crash message you have:
> May 24 15:44:31 raspberrypi weewx[1358]: **** File
> "/home/weewx/bin/weewx/station.py", line 35, in __init__
> May 24 15:44:31 raspberrypi weewx[1358]: **** self.altitude_vt =
> weewx.units.ValueTuple(float(altitude_t[0]), altitude_t[1],
> "group_altitude")
>
> The crash is not in the driver anymore ? I have no clue why, but it might
> be something completely different ?
> You may try to set back the station_type to simulator in weewx.conf to
> check if you still have the crash. If yes, something else than the driver
> is wrong.
>
>
>
> Last comment: it may not be critical as it's on your LAN, but you
> disclosed your mqtt broker user & password...
>
> Best regards,
> Frederic.
>
>
>
>
>
>
>
>
> Le jeudi 24 mai 2018 16:15:25 UTC+2, Franz a écrit :
>>
>> Hello Wysiwyg, hello Bill,
>> Thank you for the hints. I used the framework for my ESP8266 from
>> Wysiwyg. That is well suited. For the test run, I deactivated all sensors
>> and the deep sleep function. I use the AM2320 for temperature and humidity.
>> In the loop, I send the data to the broker. Unfortunately wewx has problems
>> with the data. I convert float to char in the ESP (see code example) or
>> manually text like "39.5" returns the same error message. It takes a lot of
>> patience ...
>> As a control, I use MQTT.fx on a Mac. Works perfectly. All data is
>> displayed. In the configuration of MQTT.fx I entered the client ID
>> (a020a60cc73b) of the ESP. Could this be a cause for the little problem?
>> According to Bill, all location data has been deleted (see weewx.conf).
>> Nevertheless problems.
>> Many thanks for the help!!!
>> Franz
>>
>> ESP8266
>> ----------------
>> void loop() {
>> // not used due to deepsleep
>> //
>> char tmp[20]; // String temp
>> char dtmpst[20];
>> float temp;
>> //
>> //
>> char tmh[20]; // String temp
>> char dthust[20];
>> float humi;
>>
>> temp = am2320.readTemperature();
>> dtostrf(temp, 2, 2, dtmpst); //float in str
>>
>> humi = am2320.readHumidity();
>> dtostrf(humi, 2, 2, dthust);
>>
>>
>>
>>
>> if ((temp > -40) && (temp < 80)) {
>> // outTemp_pub.publish(dtmpst);
>> outTemp_pub.publish("39.5"); //TEST manuell
>> // Serial.println(dtmpst); // Normal
>> delay(2000);
>> }
>>
>>
>>
>> //if ( humi >= 0 && humi <= 100 ) {
>> // outHumidity_pub.publish(dthust);
>> // Serial.println(dthust);
>> // delay(2000);
>> //}
>>
>>
>> }
>>
>>
>>
>> mosquitto -log
>> ------------------
>> pi@raspberrypi ~ $ sudo tail -f /var/log/mosquitto/mosquitto.log
>> 1527169098: mosquitto version 1.4.15 terminating
>> 1527169103: mosquitto version 1.4.15 (build date Sat, 07 Apr 2018
>> 11:13:41 +0100) starting
>> 1527169103: Config loaded from /etc/mosquitto/mosquitto.conf.
>> 1527169105: Opening ipv4 listen socket on port 1883.
>> 1527169105: Opening ipv6 listen socket on port 1883.
>> 1527169178: New connection from ::1 on port 1883.
>> 1527169178: New client connected from ::1 as mosqsub|1092-raspberryp (c1,
>> k60, u'AX700').
>> 1527169191: New connection from 192.168.1.20 on port 1883.
>> 1527169191: New client connected from 192.168.1.20 as
>> b825d276-27a1-4692-9fe3-0c3db0f850ca (c1, k300, u'AX700').
>> 1527169216: New connection from 192.168.1.30 on port 1883.
>> 1527169216: New client connected from 192.168.1.30 as weewx_mqttc (c1,
>> k60, u'AX700').
>> 1527169216: Socket error on client weewx_mqttc, disconnecting.
>> 1527169471: New connection from 192.168.1.30 on port 1883.
>>
>> weewx- log
>> ---------------------
>> pi@raspberrypi ~ $ tail -f /var/log/syslog
>> May 24 15:40:16 raspberrypi weewx[1196]: **** engine =
>> engine_class(config_dict)
>> May 24 15:40:16 raspberrypi weewx[1196]: **** File
>> "/home/weewx/bin/weewx/engine.py", line 74, in __init__
>> May 24 15:40:16 raspberrypi weewx[1196]: ****
>> self.preLoadServices(config_dict)
>> May 24 15:40:16 raspberrypi weewx[1196]: **** File
>> "/home/weewx/bin/weewx/engine.py", line 115, in preLoadServices
>> May 24 15:40:16 raspberrypi weewx[1196]: **** self.stn_info =
>> weewx.station.StationInfo(self.console, **config_dict['Station'])
>> May 24 15:40:16 raspberrypi weewx[1196]: **** File
>> "/home/weewx/bin/weewx/station.py", line 35, in __init__
>> May 24 15:40:16 raspberrypi weewx[1196]: **** self.altitude_vt =
>> weewx.units.ValueTuple(float(altitude_t[0]), altitude_t[1],
>> "group_altitude")
>> May 24 15:40:16 raspberrypi weewx[1196]: **** TypeError: float()
>> argument must be a string or a number
>> May 24 15:40:16 raspberrypi weewx[1196]: **** Exiting.
>> May 24 15:41:35 raspberrypi rsyslogd-2007: action 'action 17' suspended,
>> next retry is Thu May 24 15:42:05 2018 [try http://www.rsyslog.com/e/2007
>> ]
>> May 24 15:43:26 raspberrypi wpa_supplicant[461]: wlan0: WPA: Group
>> rekeying completed with 6c:70:9f:e2:fe:56 [GTK=CCMP]
>> May 24 15:43:26 raspberrypi rsyslogd-2007: action 'action 17' suspended,
>> next retry is Thu May 24 15:43:56 2018 [try http://www.rsyslog.com/e/2007
>> ]
>> May 24 15:44:21 raspberrypi rsyslogd-2007: action 'action 17' suspended,
>> next retry is Thu May 24 15:44:51 2018 [try http://www.rsyslog.com/e/2007
>> ]
>> May 24 15:44:21 raspberrypi systemd[1]: Stopping LSB: weewx weather
>> system...
>> May 24 15:44:21 raspberrypi weewx[1291]: Stopping weewx weather system:
>> weewx not running....
>> May 24 15:44:21 raspberrypi systemd[1]: Stopped LSB: weewx weather system.
>> May 24 15:44:30 raspberrypi systemd[1]: Starting LSB: weewx weather
>> system...
>> May 24 15:44:31 raspberrypi weewx[1354]: engine: Initializing weewx
>> version 3.8.0
>> May 24 15:44:31 raspberrypi weewx[1354]: engine: Using Python 2.7.9
>> (default, Sep 17 2016, 20:26:04) #012[GCC 4.9.2]
>> May 24 15:44:31 raspberrypi weewx[1354]: engine: Platform
>> Linux-4.1.7-v7+-armv7l-with-debian-8.0
>> May 24 15:44:31 raspberrypi weewx[1354]: engine: Locale is 'de_DE.UTF-8'
>> May 24 15:44:31 raspberrypi weewx[1354]: engine: pid file is
>> /var/run/weewx.pid
>> May 24 15:44:31 raspberrypi weewx[1358]: engine: Using configuration file
>> /home/weewx/weewx.conf
>> May 24 15:44:31 raspberrypi weewx[1358]: engine: debug is 1
>> May 24 15:44:31 raspberrypi weewx[1358]: engine: Initializing engine
>> May 24 15:44:31 raspberrypi weewx[1358]: engine: Loading station type
>> wxMesh (user.wxMesh)
>> May 24 15:44:31 raspberrypi systemd[1]: Started LSB: weewx weather system.
>> May 24 15:44:31 raspberrypi weewx[1344]: Starting weewx weather system:
>> weewx.
>> May 24 15:44:31 raspberrypi weewx[1358]: wxMesh: host is 192.168.1.30
>> May 24 15:44:31 raspberrypi weewx[1358]: wxMesh: topic is weewx//#
>> May 24 15:44:31 raspberrypi weewx[1358]: wxMesh: polling interval is 3.0
>> May 24 15:44:31 raspberrypi weewx[1358]: wxMesh: label map is {'HUMT':
>> 'outTemp'}
>> May 24 15:44:31 raspberrypi weewx[1358]: engine: Caught unrecoverable
>> exception in engine:
>> May 24 15:44:31 raspberrypi weewx[1358]: **** float() argument must
>> be a string or a number
>> May 24 15:44:31 raspberrypi weewx[1358]: **** Traceback (most recent
>> call last):
>> May 24 15:44:31 raspberrypi weewx[1358]: **** File
>> "/home/weewx/bin/weewx/engine.py", line 865, in main
>> May 24 15:44:31 raspberrypi weewx[1358]: **** engine =
>> engine_class(config_dict)
>> May 24 15:44:31 raspberrypi weewx[1358]: **** File
>> "/home/weewx/bin/weewx/engine.py", line 74, in __init__
>> May 24 15:44:31 raspberrypi weewx[1358]: ****
>> self.preLoadServices(config_dict)
>> May 24 15:44:31 raspberrypi weewx[1358]: **** File
>> "/home/weewx/bin/weewx/engine.py", line 115, in preLoadServices
>> May 24 15:44:31 raspberrypi weewx[1358]: **** self.stn_info =
>> weewx.station.StationInfo(self.console, **config_dict['Station'])
>> May 24 15:44:31 raspberrypi weewx[1358]: **** File
>> "/home/weewx/bin/weewx/station.py", line 35, in __init__
>> May 24 15:44:31 raspberrypi weewx[1358]: **** self.altitude_vt =
>> weewx.units.ValueTuple(float(altitude_t[0]), altitude_t[1],
>> "group_altitude")
>> May 24 15:44:31 raspberrypi weewx[1358]: **** TypeError: float()
>> argument must be a string or a number
>> May 24 15:44:31 raspberrypi weewx[1358]: **** Exiting.
>> May 24 15:44:42 raspberrypi wpa_supplicant[461]: wlan0: WPA: Group
>> rekeying completed with 6c:70:9f:e2:fe:56 [GTK=CCMP]
>> May 24 15:47:27 raspberrypi rsyslogd-2007: action 'action 17' suspended,
>> next retry is Thu May 24 15:47:57 2018 [try http://www.rsyslog.com/e/2007
>> ]
>> May 24 15:47:56 raspberrypi wpa_supplicant[461]: CTRL_IFACE: Detach
>> monitor /tmp/libdhcpcd-wpa-933.1\x00 that cannot receive messages
>>
>> mosquitto
>> ------------------------
>> pi@raspberrypi ~ $ mosquitto_sub -d -u AX700 -P 84N7601 -t "weewx/#" -v
>> Client mosqsub|1398-raspberryp sending CONNECT
>> Client mosqsub|1398-raspberryp received CONNACK
>> Client mosqsub|1398-raspberryp sending SUBSCRIBE (Mid: 1, Topic: weewx/#,
>> QoS: 0)
>> Client mosqsub|1398-raspberryp received SUBACK
>> Subscribed (mid: 1): 0
>> Client mosqsub|1398-raspberryp received PUBLISH (d0, q0, r0, m0,
>> 'weewx/outTemp', ... (4 bytes))
>> weewx/outTemp 39.5
>> Client mosqsub|1398-raspberryp received PUBLISH (d0, q0, r0, m0,
>> 'weewx/outTemp', ... (4 bytes))
>> weewx/outTemp 39.5
>>
>> weewx.conf
>> -------------------
>> # WEEWX CONFIGURATION FILE
>> #
>> # Copyright (c) 2009-2015 Tom Keffer <[email protected]>
>> # See the file LICENSE.txt for your rights.
>>
>>
>> ##############################################################################
>>
>> # This section is for general configuration information.
>>
>> # Set to 1 for extra debug info, otherwise comment it out or set to zero
>> debug = 1
>>
>> # Root directory of the weewx data file hierarchy for this station
>> WEEWX_ROOT = /home/weewx
>>
>> # How long to wait before timing out a socket (FTP, HTTP) connection
>> socket_timeout = 20
>>
>> # Do not modify this. It is used when installing and updating weewx.
>> version = 3.8.0
>>
>>
>> ##############################################################################
>>
>> # This section is for information about the station.
>> [Station]
>> station_type = wxMesh
>>
>> [wxMesh]
>> host = 192.168.1.30
>> username = AX700
>> password = 84N7601
>> topic = weewx/
>> driver = user.wxMesh
>> poll_interval = 3
>> loop_on_init = true
>>
>> [[label_map]]
>> HUMT = outTemp
>> # RHUM = outHumidity
>>
>> #Description of the station location
>> #location = Wetter Rheinbach Voreifel
>> #
>> #Latitude and longitude in decimal degrees
>> #latitude = 50.3552
>> #longitude = 6.5346
>>
>> # Altitude of the station, with unit it is in. This is downloaded from
>> # from the station if the hardware supports it.
>> # altitude = 270, meter # Choose 'foot' or 'meter' for unit
>>
>> # Set to type of station hardware. There must be a corresponding
>> stanza
>> # in this file with a 'driver' parameter indicating the driver to be
>> used.
>> # station_type = Simulator
>>
>> # If you have a website, you may specify an URL
>> #station_url = http://www.example.com
>>
>> # The start of the rain year (1=January; 10=October, etc.). This is
>> # downloaded from the station if the hardware supports it.
>> # rain_year_start = 1
>>
>> # Start of week (0=Monday, 6=Sunday)
>> # week_start = 6
>>
>>
>> ##############################################################################
>>
>> [Simulator]
>> # This section is for the weewx weather station simulator
>>
>> # The time (in seconds) between LOOP packets.
>> loop_interval = 2.5
>>
>> # The simulator mode can be either 'simulator' or 'generator'.
>> # Real-time simulator. Sleep between each LOOP packet.
>> mode = simulator
>> # Generator. Emit LOOP packets as fast as possible (useful for
>> testing).
>> #mode = generator
>>
>> # The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the
>> default
>> # is to use the present time.
>> #start = 2011-01-01T00:00
>>
>> # The driver to use:
>> # driver = weewx.drivers.simulator
>>
>>
>> ##############################################################################
>>
>> # This section is for uploading data to Internet sites
>>
>> [StdRESTful]
>>
>> [[MQTT]]
>> topic = weewx
>> append_units_label = True
>> retain = False
>> aggregation = individual
>> unit_system = METRIC
>> binding = loop
>>
>> [[StationRegistry]]
>> # To register this weather station with weewx, set this to true
>> register_this_station = false
>>
>>
>> Am Mittwoch, 23. Mai 2018 14:22:31 UTC+2 schrieb Wysiwyg:
>>>
>>> Hi There!
>>>
>>> Sorry for confusion between wxMQTT.py & wxMesh.py.
>>>
>>> wxMesh.py => Original naming from Bill's driver.
>>> When I discussed with Bill and modified his driver for my own use, Bill
>>> mention the name should be updated.
>>> I named it wxMQTT.py, but I didnt finalized the job correctly :-(
>>> I shall change the name in weewx.conf and also I think there are some
>>> mention in the python code.
>>> Anyway, if all is name wxMesh. it shall work.
>>>
>>>
>>>
>>> regarding "float".
>>> My arduino/ESP8266 code also publish some float. you can see here:
>>> https://github.com/bonjour81/station_meteo/blob/master/sensors/MQTT_TH_UV_rain/src/main.cpp
>>> .
>>> The values are truncated at 2 digit after dot.
>>> I also added a bit of checks in my arduino code to confirm validity of
>>> values before publishing
>>>
>>> You can use an other subscriber to check the content of your messages in
>>> parallel to weewx (like mosquitto_sub), but for more comfortable use, you
>>> can try mqtt dash on android. (
>>> https://play.google.com/store/apps/details?id=net.routix.mqttdash&hl=fr
>>> ).
>>> You just have to setup your mqtt server once, and you can define some
>>> tiles for each topic.
>>> I use "text" tiles for my weewx topics (ex: weewx/outTemp).
>>> It also display since how much time last publish was received.
>>> it's pretty nice for debugging.
>>>
>>>
>>> in parallel to
>>> tail -f /var/log/syslog
>>> you may also try:
>>> tail -f /var/log/mosquitto/mosquitto.conf
>>>
>>>
>>>
>>>
>>>
>>>
>>> Le mercredi 23 mai 2018 13:32:29 UTC+2, Bill Morrow a écrit :
>>>>
>>>> Hi Franz, progress! It looks like you have fixed the file corruption
>>>> issue.
>>>>
>>>> Some comments below...
>>>>
>>>> On Wednesday, 23 May 2018 08:17:13 UTC-3, Franz wrote:
>>>>>
>>>>> Hello Vince,
>>>>> with wget https: // ... copied the file wxMQTT.py. Checksum is ok.
>>>>> Are the wxMesh.py and wxMQTT.py files the same?
>>>>>
>>>>
>>>> I think you have configuration in weewx.conf such that your file should
>>>> be named wxMesh.py. Namely these configuration parameters::
>>>>
>>>> station_type = wxMesh
>>>> ...
>>>> [wxMesh]
>>>> driver = user.wxMesh
>>>>
>>>>
>>>> The error messages have changed (see log file). I suspect it's because
>>>>> of the MQTT data. MQTT sends float values with me. I have to change the
>>>>> Arduino program. Many thanks for the help. I'm probably a little further.
>>>>>
>>>>
>>>> Consider editing your weewx.conf file and changing the debug setting
>>>> from
>>>>
>>>> # Set to 1 for extra debug info, otherwise comment it out or set to
>>>> zero.
>>>> debug = 0
>>>>
>>>> to
>>>>
>>>> # Set to 1 for extra debug info, otherwise comment it out or set to
>>>> zero.
>>>> debug =1
>>>>
>>>> and then restart weewx. Watch the log file with
>>>>
>>>> tail -f /var/log/syslog
>>>>
>>>> This should give more information on how the driver is attempting to
>>>> turn some part of the MQTT payload to a floating point number.
>>>>
>>>>
>>>> ---
>>>>> pi@raspberrypi /home/weewx/bin/user $ ls
>>>>> extensions.py __init__.py installer wxMesh.pyc
>>>>> extensions.pyc __init__.pyc wxMesh.py
>>>>> pi@raspberrypi /home/weewx/bin/user $ sudo sha1sum wxMesh.py
>>>>> 826d007e040b540cb5c6092842667c9966852db9 wxMesh.py
>>>>> pi@raspberrypi /home/weewx/bin/user $
>>>>> ----
>>>>> pi@raspberrypi ~ $ sudo /etc/init.d/weewx start
>>>>> [ ok ] Starting weewx (via systemctl): weewx.service.
>>>>> pi@raspberrypi ~ $ sudo /etc/init.d/weewx status -l
>>>>> ● weewx.service - LSB: weewx weather system
>>>>> Loaded: loaded (/etc/init.d/weewx)
>>>>> Active: active (exited) since Mi 2018-05-23 11:52:38 CEST; 6s ago
>>>>> Process: 1396 ExecStop=/etc/init.d/weewx stop (code=exited,
>>>>> status=0/SUCCESS)
>>>>> Process: 1591 ExecStart=/etc/init.d/weewx start (code=exited,
>>>>> status=0/SUCCESS)
>>>>>
>>>>> Mai 23 11:52:38 raspberrypi weewx[1605]: **** File
>>>>> "/home/weewx/bin/weewx/engine.py", line 865, in main
>>>>> Mai 23 11:52:38 raspberrypi weewx[1605]: **** engine =
>>>>> engine_class(config_dict)
>>>>> Mai 23 11:52:38 raspberrypi weewx[1605]: **** File
>>>>> "/home/weewx/bin/weewx/engine.py", line 74, in __init__
>>>>> Mai 23 11:52:38 raspberrypi weewx[1605]: ****
>>>>> self.preLoadServices(config_dict)
>>>>> Mai 23 11:52:38 raspberrypi weewx[1605]: **** File
>>>>> "/home/weewx/bin/weewx/engine.py", line 115, in ...ices
>>>>> Mai 23 11:52:38 raspberrypi weewx[1605]: **** self.stn_info =
>>>>> weewx.station.StationInfo(self.cons...n'])
>>>>> Mai 23 11:52:38 raspberrypi weewx[1605]: **** File
>>>>> "/home/weewx/bin/weewx/station.py", line 35, in ...it__
>>>>> Mai 23 11:52:38 raspberrypi weewx[1605]: **** self.altitude_vt =
>>>>> weewx.units.ValueTuple(float(alt...de")
>>>>> Mai 23 11:52:38 raspberrypi weewx[1605]: **** TypeError: float()
>>>>> argument must be a string or a number
>>>>> Mai 23 11:52:38 raspberrypi weewx[1605]: **** Exiting.
>>>>> Hint: Some lines were ellipsized, use -l to show in full.
>>>>> pi@raspberrypi ~ $
>>>>> -----------
>>>>>
>>>>>
>>>>> Am Dienstag, 22. Mai 2018 21:42:24 UTC+2 schrieb Vince Skahan:
>>>>>>
>>>>>> On Tuesday, May 22, 2018 at 10:45:58 AM UTC-7, Bill Morrow wrote:
>>>>>>>
>>>>>>>
>>>>>>> Try going in to your bin/user/ directory and run these commands at
>>>>>>> your shell prompt
>>>>>>>
>>>>>>> wget https://
>>>>>>> raw.githubusercontent.com/bonjour81/ESP8266-MQTT-WEEWX/master/weewx/wxMQTT.py
>>>>>>> mv wxMQTT.py wxMesh.py
>>>>>>>
>>>>>>
>>>>>>
>>>>>> You might also check the checksums on the file to verify it's the
>>>>>> same as the master copy.
>>>>>> Mine looks like:
>>>>>>
>>>>>> pi@pi3:/tmp $ sha1sum wxMQTT.py
>>>>>> 826d007e040b540cb5c6092842667c9966852db9 wxMQTT.py
>>>>>>
>>>>>>
>>>>>> pi@pi3:/tmp $ sha256sum wxMQTT.py
>>>>>> e99e86a15f3315eb1dd0db38f4ce759c4af2cb4965f71e031000a380c087d32b
>>>>>> wxMQTT.py
>>>>>>
>>>>>>
>>>>>>
>>>>>>
