Hello Vince, with wget https: // ... copied the file wxMQTT.py. Checksum is ok. Are the wxMesh.py and wxMQTT.py files the same? The error messages have changed (see log file). I suspect it's because of the MQTT data. MQTT sends float values with me. I have to change the Arduino program. Many thanks for the help. I'm probably a little further. Franz --- pi@raspberrypi /home/weewx/bin/user $ ls extensions.py __init__.py installer wxMesh.pyc extensions.pyc __init__.pyc wxMesh.py pi@raspberrypi /home/weewx/bin/user $ sudo sha1sum wxMesh.py 826d007e040b540cb5c6092842667c9966852db9 wxMesh.py pi@raspberrypi /home/weewx/bin/user $ ---- pi@raspberrypi ~ $ sudo /etc/init.d/weewx start [ ok ] Starting weewx (via systemctl): weewx.service. pi@raspberrypi ~ $ sudo /etc/init.d/weewx status -l ● weewx.service - LSB: weewx weather system Loaded: loaded (/etc/init.d/weewx) Active: active (exited) since Mi 2018-05-23 11:52:38 CEST; 6s ago Process: 1396 ExecStop=/etc/init.d/weewx stop (code=exited, status=0/SUCCESS) Process: 1591 ExecStart=/etc/init.d/weewx start (code=exited, status=0/SUCCESS)
Mai 23 11:52:38 raspberrypi weewx[1605]: **** File "/home/weewx/bin/weewx/engine.py", line 865, in main Mai 23 11:52:38 raspberrypi weewx[1605]: **** engine = engine_class(config_dict) Mai 23 11:52:38 raspberrypi weewx[1605]: **** File "/home/weewx/bin/weewx/engine.py", line 74, in __init__ Mai 23 11:52:38 raspberrypi weewx[1605]: **** self.preLoadServices(config_dict) Mai 23 11:52:38 raspberrypi weewx[1605]: **** File "/home/weewx/bin/weewx/engine.py", line 115, in ...ices Mai 23 11:52:38 raspberrypi weewx[1605]: **** self.stn_info = weewx.station.StationInfo(self.cons...n']) Mai 23 11:52:38 raspberrypi weewx[1605]: **** File "/home/weewx/bin/weewx/station.py", line 35, in ...it__ Mai 23 11:52:38 raspberrypi weewx[1605]: **** self.altitude_vt = weewx.units.ValueTuple(float(alt...de") Mai 23 11:52:38 raspberrypi weewx[1605]: **** TypeError: float() argument must be a string or a number Mai 23 11:52:38 raspberrypi weewx[1605]: **** Exiting. Hint: Some lines were ellipsized, use -l to show in full. pi@raspberrypi ~ $ ----------- Am Dienstag, 22. Mai 2018 21:42:24 UTC+2 schrieb Vince Skahan: > > On Tuesday, May 22, 2018 at 10:45:58 AM UTC-7, Bill Morrow wrote: >> >> >> Try going in to your bin/user/ directory and run these commands at your >> shell prompt >> >> wget https:// >> raw.githubusercontent.com/bonjour81/ESP8266-MQTT-WEEWX/master/weewx/wxMQTT.py >> mv wxMQTT.py wxMesh.py >> > > > You might also check the checksums on the file to verify it's the same as > the master copy. > Mine looks like: > > pi@pi3:/tmp $ sha1sum wxMQTT.py > 826d007e040b540cb5c6092842667c9966852db9 wxMQTT.py > > > pi@pi3:/tmp $ sha256sum wxMQTT.py > e99e86a15f3315eb1dd0db38f4ce759c4af2cb4965f71e031000a380c087d32b wxMQTT.py > > > >
