Paul My Humidity value is being reported correctly. I did not update the rtldavis file.
LOOP: 2019-03-28 21:35:14 EDT (1553823314) dateTime: 1553823314, maxSolarRad: 0.0, outHumidity: 59.7, rainRate: 0, usUnits: 1. The issue I'm having is wind and wind direction is not being decoded. Rich On Thursday, March 28, 2019 at 8:14:29 PM UTC-4, Paul Anderson wrote: > > Luc and Rich > > Had been doing the testing on a laptop which didn't have Weewx installed > on. Today I installed everything on my PI3 development machine. I can't > seem to get humidity to report correctly.This message shows in weex log: > > Mar 28 19:49:54 pi3-dev weewx[1837]: engine: 2019-03-28 19:49:54 EDT > (1553816994) LOOP value 'outHumidity' 216.9 outside limits (0.0, 100.0) > > If I change line 1182 of rtldavis.py from: humidity = humidity_raw / > 10.0 to humidity = humidity_raw / 10.0 no errors but wrong humidity > value. Current real humidity here is 50% to 60% > Where to start? :) > > Thanks, > Paul > > On Thursday, March 28, 2019 at 7:40:22 AM UTC-4, rich T wrote: >> >> Luc >> >> Thanks...I figured it was a configuration error on my part. Later this >> evening will give it a try. >> >> Thanks >> Rich >> >> On Thursday, March 28, 2019 at 7:30:52 AM UTC-4, [email protected] wrote: >> >>> On Wednesday, 27 March 2019 18:27:40 UTC-3, rich T wrote: >>>> >>>> Looks like I'm only decoding a couple of the data fields, in which >>>> could be configuration error on my part. The driver did crash due to a >>>> "none type" error, again the cause could be configuration error on my part. >>>> >>> >>> Rich, >>> >>> Your command line contained the phrase "[options]". This is not >>> recognized by the go-parser and all entries which come after are neglected. >>> Therefore no messages were received because you've got the default >>> EU-frequencies. >>> The init value of pct_good was none, I better change it to 0.0 to avoid >>> the type error. This error only happens when no single message is received >>> during 5 minutes. >>> >>> I will change the programs main.go and weewx-rtldavis as follows: >>> - The -tf and -tr option are required (program weewx-rtldavis will add >>> them automatically) >>> - When -tf and/or -tr is missing, main.go report: EXIT PROGRAM with a >>> description. >>> - weewx-rtldavis will end itself (and rtldavis.go) when it sees this >>> message. (when rtldavis should stop itself, it won't help because >>> weewx-rtldavis will restart the program again after 60 seconds). >>> >>> Luc >>> >>
