Upon going to upgrade WeeWX, took the leap to upgrade all: ie, 1-WeeWX, 2-Bskin and 3-hardware (Rpi). Sure indeed, opened 3 Pandora boxes... but before mixing too much, lets start with the "simple" and awkward behaviour (in recent post, I mentioned upgrading WeeWX to 4 and Bskin to 1.1b8, which lead to other troubles, but lets disregard this for now, as it is another SD card).
Original setting: 1. WeeWX 3.9.2 2. Bskin 1.1b7 (with MQTT) 3. Rpi 3B+ The awkward thing (and purpose note of this post) is that there is a hardware related Rpi conflict issue. That is: A) SD card with original setting above on Rpi 3B+ works well and as expected B) SAME SD card with original setting above on Rpi 4B is NOT updating data (charts) That is, if plug SD card into Rpi 3B+ works; if plug SD card into Rpi 4B it doesn't (while MQTT connected and ticking all time). My WX website (temp Domain): http://www.appnea.net Per this posting time, SD into Rpi 4B. You may notice no update since Dec5 11:55pm (can switch back to Rpi 3B+ per request). Not sure if WeeWX or Bskin issue. Note: PWS is WeatherFlow. X -- You received this message because you are subscribed to the Google Groups "weewx-development" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-development/ef91d367-6fd6-47bc-93d9-0e0d5f7b129a%40googlegroups.com.
