On sensor 1, sensor_type 242 I have: bar_absolute 29.799 bar_hi_at1593193506 bar_sea_level29.812 arch_int300 bar_lo29.812 bar_hi29.818 bar_lo_at1593193598 ts1593193800
On sensor 2, sensor_type 242 I have: temp_in_lo_at1593193748 arch_int300 temp_in_hi95.4 temp_in_hi_at1593193508 hum_in_hi38.2 temp_in_last95 temp_in_lo94.9 hum_in_lo37.6 hum_in_last38.2 dew_point_in65.6 hum_in_lo_at1593193508 heat_index_in98.2 hum_in_hi_at1593193748 ts1593193800 On sensor 2, sensor_type 242 I have: wind_speed_avgnull dew_point_hi_atnull supercap_volt_lastnull uv_dosenull wind_chill_lastnull solar_rad_hinull solar_volt_lastnull dew_point_lo_atnull thsw_index_hi_atnull dew_point_lastnull rain_size1 thsw_index_lonull uv_index_hinull thsw_index_hinull thsw_index_lo_atnull solar_rad_hi_at1593193800 heat_index_hinull arch_int300 good_packets_streak33 wind_runnull rain_rate_hi_at1593193508 tx_id3 temp_hi83.2 temp_lo82.8 wind_dir_of_prevailnull thw_index_lastnull rain_rate_hi_clicks0 etnull rainfall_in0 wind_chill_lo_atnull rainfall_mm0 wet_bulb_lastnull trans_batterynull rain_rate_hi_in0 hum_lonull heat_index_lastnull hum_hinull heat_index_hi_atnull rain_rate_hi_mm0 rainfall_clicks0 wet_bulb_hi_at1593180160 solar_rad_volt_last12 wind_speed_hinull temp_last82.8 temp_avg82.9 trans_battery_flag0 hum_lastnull wind_chill_lonull wet_bulb_hinull wind_speed_hi_atnull reception98 wet_bulb_lo_atnull solar_rad_avgnull error_packets0 afc-2 cooling_degree_days0.061805565 rssi-80 wet_bulb_lonull wind_speed_hi_dirnull temp_lo_at1593193685 dew_point_hinull thw_index_lonull uv_index_hi_atnull dew_point_lonull solar_energynull resynchs0 temp_hi_at1593193513 thw_index_hinull hum_lo_atnull thw_index_lo_atnull thw_index_hi_atnull thsw_index_lastnull hum_hi_atnull uv_index_avgnull uv_volt_last3 heating_degree_days0 ts1593193800 Op vrijdag 26 juni 2020 om 23:26:59 UTC+2 schreef Maarten van der Hoeven: > Doh!!! That makes a difference. Sigh... > > Progress now, but an new failure > > Jun 26 23:21:16 ubuntu weewx[5603] INFO user.WLLDriver: Failure to get > data > https://api.weatherlink.com/v2/historic/91978?api-key=nivwsekqwfbkhqtqwo8nximhl7zgxpcs&t=1593206474&start-timestamp=1593120000&end-timestamp=1593206400&api-signature=ae70c3c915ea7c2a0d01250a291f962f0f75bcddf925f27ba39389e1a3ffa875 > > - try 3 - ('bar_sea_level') > > URL response. JSON response is very long. What part do you want to see? > Small part: > > > 1 > > bar_absolute > 30.002 > bar_hi_at > 1593120400 > bar_sea_level > 30.015 > arch_int > 300 > bar_lo > 30.011 > bar_hi > 30.016 > bar_lo_at > 1593120430 > ts > 1593120600 > > Op vrijdag 26 juni 2020 om 23:15:11 UTC+2 schreef Maarten van der Hoeven: > >> Here is my driver-config. api-secret is set (although I've changed it a >> bit in this copy below): >> >> [WLLDriver] >> driver = user.WLLDriver >> max_tries = 5 >> retry_wait = 10 >> poll_interval = 5 >> url = http://192.168.2.33:80/v1/current_conditions >> wl_apikey = nivwsekqwfbkhqtqwo8nximhl7zgxpcs >> wl _apisecret = x6omxelabcdefgbn1ef1msbqfdmiwgys >> wl_stationid = 91978 >> wl_archive_interval = 5 >> >> Op vrijdag 26 juni 2020 om 23:12:17 UTC+2 schreef [email protected]: >> >>> Do you've set the api secret ? >>> >>> Le vendredi 26 juin 2020 à 23:09:59 UTC+2, [email protected] a écrit : >>> >>>> Hmmm, not sure. Looks like time&date is right to me >>>> >>>> root@ubuntu:/etc/weewx# date >>>> Fri 26 Jun 2020 11:08:42 PM CEST >>>> root@ubuntu:/etc/weewx# >>>> >>>> >>>> >>>> Op vrijdag 26 juni 2020 om 23:07:24 UTC+2 schreef [email protected]: >>>> >>>>> Check your time server. It appear that is not correctly set and the >>>>> API return a wrong time when you request API >>>>> >>>>> Le vendredi 26 juin 2020 à 23:04:35 UTC+2, [email protected] a écrit : >>>>> >>>>>> Okay, URL and responses >>>>>> >>>>>> >>>>>> https://api.weatherlink.com/v2/historic/91978?api-key=nivwsekqwfbkhqtqwo8nximhl7zgxpcs&t=1593205164&start-timestamp=1593118500&end-timestamp=1593204900&api-signature=2459c09bc4e1f00ab25912b82ab1df0db96860afff1b0194df98fc752cdf8f2c >>>>>> >>>>>> code >>>>>> "401" >>>>>> message >>>>>> "Invalid API Signature." >>>>>> >>>>>> >>>>>> >>>>>> https://api.weatherlink.com/v2/historic/91978?api-key=nivwsekqwfbkhqtqwo8nximhl7zgxpcs&t=1593205164&start-timestamp=1593118500&end-timestamp=1593204900&api-signature=2459c09bc4e1f00ab25912b82ab1df0db96860afff1b0194df98fc752cdf8f2c >>>>>> >>>>>> code >>>>>> "401" >>>>>> message >>>>>> "Invalid API Signature." >>>>>> >>>>>> >>>>>> >>>>>> https://api.weatherlink.com/v2/historic/91978?api-key=nivwsekqwfbkhqtqwo8nximhl7zgxpcs&t=1593205153&start-timestamp=1593118500&end-timestamp=1593204900&api-signature=ae52423cb4b1756a678979aeffe0817d424a26cb5b1b416d0bb40b0838c179da >>>>>> >>>>>> code >>>>>> "401" >>>>>> message >>>>>> "Invalid API Signature." >>>>>> >>>>>> Op vrijdag 26 juni 2020 om 22:58:12 UTC+2 schreef [email protected] >>>>>> : >>>>>> >>>>>>> No, I would like just to restart weewx and when debug mode show URL >>>>>>> API, request this link on your favorite browser and put on comment the >>>>>>> result >>>>>>> >>>>>>> Le vendredi 26 juin 2020 à 22:54:19 UTC+2, [email protected] a >>>>>>> écrit : >>>>>>> >>>>>>>> Or do you mean running weewx standalone? >>>>>>>> >>>>>>>> Parameter name: "api-key" has value >>>>>>>> "nivwsekqwfbkhqtqwo8nximhl7zgxpcs" >>>>>>>> Parameter name: "api-secret" has value "ABC123" >>>>>>>> Parameter name: "end-timestamp" has value "1593204600" >>>>>>>> Parameter name: "start-timestamp" has value "1593118200" >>>>>>>> Parameter name: "station-id" has value "91978" >>>>>>>> Parameter name: "t" has value "1593204804" >>>>>>>> Parameter name: "api-key" has value >>>>>>>> "nivwsekqwfbkhqtqwo8nximhl7zgxpcs" >>>>>>>> Parameter name: "api-secret" has value "ABC123" >>>>>>>> Parameter name: "end-timestamp" has value "1593204600" >>>>>>>> Parameter name: "start-timestamp" has value "1593118200" >>>>>>>> Parameter name: "station-id" has value "91978" >>>>>>>> Parameter name: "t" has value "1593204816" >>>>>>>> >>>>>>>> Op vrijdag 26 juni 2020 om 22:45:24 UTC+2 schreef Maarten van der >>>>>>>> Hoeven: >>>>>>>> >>>>>>>>> I've got weewx already on debug. Or do you mean something else? >>>>>>>>> >>>>>>>>> # WEEWX CONFIGURATION FILE >>>>>>>>> >>>>>>>>> >>>>>>>>> ############################################################################## >>>>>>>>> >>>>>>>>> # This section is for general configuration information. >>>>>>>>> >>>>>>>>> # Set to 1 for extra debug info, otherwise comment it out or set >>>>>>>>> to zero >>>>>>>>> debug = 1 >>>>>>>>> >>>>>>>>> # Root directory of the weewx data file hierarchy for this station >>>>>>>>> WEEWX_ROOT = / >>>>>>>>> >>>>>>>>> # Whether to log successful operations >>>>>>>>> log_success = True >>>>>>>>> >>>>>>>>> # Whether to log unsuccessful operations >>>>>>>>> log_failure = True >>>>>>>>> >>>>>>>>> # How long to wait before timing out a socket (FTP, HTTP) >>>>>>>>> connection >>>>>>>>> socket_timeout = 20 >>>>>>>>> >>>>>>>>> # Do not modify this. It is used when installing and updating >>>>>>>>> weewx. >>>>>>>>> version = 4.1.1 >>>>>>>>> >>>>>>>>> Op vrijdag 26 juni 2020 om 22:35:10 UTC+2 schreef >>>>>>>>> [email protected]: >>>>>>>>> >>>>>>>>>> Relaunch weewx and use the url on debug. Here, the url is not in >>>>>>>>>> the current timestamp. It for this thay you've this error. >>>>>>>>> >>>>>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-development" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-development/94ea37cd-5a1c-4f45-b744-12192f0ac06bn%40googlegroups.com.
