@Bastiaan, when I change this piece of code (txid=2), it is retrieving live
data from ISS:
def DecodeDataWLL(self, data):
timestamp = data['ts']
packet = {'dateTime': timestamp, 'usUnits': weewx.US}
for condition in data['conditions']:
if condition["data_structure_type"] == 1 and
*condition['txid']
== 2:*
Op zaterdag 27 juni 2020 om 10:40:09 UTC+2 schreef Maarten van der Hoeven:
> Hello Bastiaan,
>
> The WLL is a wonderful piece of equipment. Now I can run production with
> WeeWX, and start a test-enviroment in a virtual machine, while talking to
> the same WLL.
>
> I've installed your driver. I have running my ISS on ID 2 (and have an
> external temp sensor running on sensor 3).
>
> When ISS set to ID=2, I only seems to see internal sensor data, like:
>
> LOOP: 2020-06-27 10:37:51 CEST (1593247071) altimeter:
> 1008.6586993806619, barometer: 1009.0082158009718, dateTime: 1593247071,
> inDewpoint: 17.27777777777778, inHumidity: 55.1, inTemp:
> 27.055555555555557, maxSolarRad: None, pressure: 1008.5679853403257,
> rainRate: 0.0, usUnits: 17
> {'data': {'broadcast_port': 22222, 'duration': 3600}, 'error': None}
> LOOP: 2020-06-27 10:37:51 CEST (1593247071) dateTime: 1593247071,
> maxSolarRad: None, rainRate: 0.0, usUnits: 17
> LOOP: 2020-06-27 10:37:53 CEST (1593247073) dateTime: 1593247073,
> maxSolarRad: None, rainRate: 0.0, usUnits: 17
> LOOP: 2020-06-27 10:37:56 CEST (1593247076) dateTime: 1593247076,
> maxSolarRad: None, rainRate: 0.0, usUnits: 17
> LOOP: 2020-06-27 10:37:58 CEST (1593247078) dateTime: 1593247078,
> maxSolarRad: None, rainRate: 0.0, usUnits: 17
> LOOP: 2020-06-27 10:38:01 CEST (1593247081) dateTime: 1593247081,
> maxSolarRad: None, rainRate: 0.0, usUnits: 17
> LOOP: 2020-06-27 10:38:03 CEST (1593247083) dateTime: 1593247083,
> maxSolarRad: None, rainRate: 0.0, usUnits: 17
> LOOP: 2020-06-27 10:38:06 CEST (1593247086) dateTime: 1593247086,
> maxSolarRad: None, rainRate: 0.0, usUnits: 17
> LOOP: 2020-06-27 10:38:06 CEST (1593247086) altimeter:
> 1008.6925672055719, barometer: 1009.04207968256, dateTime: 1593247086,
> inDewpoint: 17.27777777777778, inHumidity: 55.1, inTemp:
> 27.055555555555557, maxSolarRad: None, pressure: 1008.6018492219138,
> rainRate: 0.0, usUnits: 17
> LOOP: 2020-06-27 10:38:08 CEST (1593247088) dateTime: 1593247088,
> maxSolarRad: None, rainRate: 0.0, usUnits: 17
>
>
>
> When set ISS to ID=1, I see the same
>
> LOOP: 2020-06-27 10:38:56 CEST (1593247136) altimeter:
> 1008.7264350305117, barometer: 1009.075943564148, dateTime: 1593247136,
> inDewpoint: 17.22222222222222, inHumidity: 54.9, inTemp:
> 27.055555555555557, maxSolarRad: None, pressure: 1008.635713103502,
> rainRate: 0.0, usUnits: 17
> {'data': {'broadcast_port': 22222, 'duration': 3600}, 'error': None}
> LOOP: 2020-06-27 10:38:56 CEST (1593247136) dateTime: 1593247136,
> maxSolarRad: None, rainRate: 0.0, usUnits: 17
> LOOP: 2020-06-27 10:38:58 CEST (1593247138) dateTime: 1593247138,
> maxSolarRad: None, rainRate: 0.0, usUnits: 17
> LOOP: 2020-06-27 10:39:01 CEST (1593247141) dateTime: 1593247141,
> maxSolarRad: None, rainRate: 0.0, usUnits: 17
> LOOP: 2020-06-27 10:39:03 CEST (1593247143) dateTime: 1593247143,
> maxSolarRad: None, rainRate: 0.0, usUnits: 17
> LOOP: 2020-06-27 10:39:06 CEST (1593247146) dateTime: 1593247146,
> maxSolarRad: None, rainRate: 0.0, usUnits: 17
> LOOP: 2020-06-27 10:39:08 CEST (1593247148) dateTime: 1593247148,
> maxSolarRad: None, rainRate: 0.0, usUnits: 17
> LOOP: 2020-06-27 10:39:11 CEST (1593247151) dateTime: 1593247151,
> maxSolarRad: None, rainRate: 0.0, usUnits: 17
> LOOP: 2020-06-27 10:39:11 CEST (1593247151) altimeter:
> 1008.6586993806619, barometer: 1009.0082158009718, dateTime: 1593247151,
> inDewpoint: 17.27777777777778, inHumidity: 55.1, inTemp:
> 27.055555555555557, maxSolarRad: None, pressure: 1008.5679853403257,
> rainRate: 0.0, usUnits: 17
> LOOP: 2020-06-27 10:39:13 CEST (1593247153) dateTime: 1593247153,
> maxSolarRad: None, rainRate: 0.0, usUnits: 17
>
> Op zaterdag 27 juni 2020 om 10:17:55 UTC+2 schreef Bastiaan Meelberg:
>
>> Python is pretty new to me, I was unaware of the use of the _packet
>> underscore method. I will update my code. Thanks for the tip.
>>
>> Have a look at the rain calculations, I found out yesterday, during a
>> rain shower, setting the self.rain_previous_period to zero is not a
>> good idea. If weewx is reloading the diver (and it does) it will add the
>> daily rain as a whole new rainfall. I will update my repo during the day.
>>
>> Also at midnight WLL will reset the rain_daily, so at that moment the
>> rain_previous must be reset.
>>
>> I also don't think you need to do all the METRIC and METRICWX
>> conversions. Weewx will do that for you, if you set the 'usUnits':
>> weewx.US in the _packet. The LOOP will be generated and weewx is adding
>> the record using the set database metrics.
>>
>>
>>
>> On Friday, June 26, 2020 at 6:56:18 PM UTC+2, [email protected] wrote:
>>>
>>> Hi everyone and thank you for your support ! I'm very glade to know that
>>> people want to make this driver because there are not a lot.
>>>
>>> This is my repo : https://github.com/Drealine/WLLDriver
>>>
>>> @Bastiaan it's very nice ! Just, why you use update packet or not simply
>>> do a for _packet in blabla(): It's a udp protocol ?
>>>
>>> With my driver, you can retrive lost data by using API v2 of
>>> Weatherlink. Depend to your subscription.
>>>
>>> Glad to work with you, and if you want, it will be more often that split
>>> some git to one.
>>>
>>> Regards, -fp
>>>
>>> Le vendredi 26 juin 2020 à 18:35:45 UTC+2, Bastiaan Meelberg a écrit :
>>>
>>>> Hi,
>>>>
>>>> I’m also working on a wll driver, including The 2,5 UDP packages. It is
>>>> running now for a few days with good results (no rain check yet).
>>>> The integration with the online fetch sounds interesting!
>>>> This is my git fork:
>>>> https://github.com/grebleem/WeatherLinkliveUDP
>>>>
>>>> It is feeding my site: https://meteo-otterlo.nl
>>>>
>>>> Cheers, Bastiaan
>>>>
>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-development" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-development/8069972f-cce3-44b6-8f7b-4f578acbf7a9n%40googlegroups.com.
