The MQTT is sending the wind in kph:
{"dateTime": "1593338025.0", "windSpeed_kph": "4.828032", "winDir": "319.0",
"windGust_kph": "25.749504", "windGustDir": "169.0", "rain_cm": "0.0",
"rainRate_mm_per_hour": "0.0", "beaufort_count": "1.0", "maxSolarRad_Wpm2":
"822.1835611108015", "hourRain_cm": "0.0", "rain24_cm": "0.06", "dayRain_mm"
: "0.0", "usUnits": "16.0"}
The Belchertown skin is not altering the MQTT message, so I made this
change to the weewx.conf file to display the correct unit:
# Various options for customizing your reports.
[[Defaults]]
[[[Units]]]
[[[[Groups]]]]
group_speed = km_per_hour # Options are 'mile_per_hour',
'km_per_hour', 'knot', or 'meter_per_second'
If you need another MQTT need to send it.
On Sunday, June 28, 2020 at 11:51:02 AM UTC+2, Maarten van der Hoeven wrote:
>
> Driver updated, data is okay now!
>
> Also running MQTT and bechertown: I see windspeed reported as km/h,
> although I've set the unit to m/s in weewx.conf
>
> Yes, tx_id 3 is an extra temp sensor. I've got the ISS on ID=2, and the
> temp sensor on ID=3
>
> Op zondag 28 juni 2020 om 11:48:59 UTC+2 schreef Bastiaan Meelberg:
>
>> Very helpful Maarten! Thank you.
>>
>> The temp with tx_id 3 that is an 'extra' temp sensor?
>>
>>
--
You received this message because you are subscribed to the Google Groups
"weewx-development" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-development/8347a821-0921-44ca-8596-75d4e970b2e5o%40googlegroups.com.
