My apologies for my misinformation... I thought I had set the windspeed om
meter_per_seconds, but it was still on the default km_per_hour.
I've changed the units in weewx.conf, now displaying as meter_per_second
Op zondag 28 juni 2020 12:00:44 UTC+2 schreef Bastiaan Meelberg:
>
> The MQTT is sending the wind in kph:
>
> {"dateTime": "1593338025.0", "windSpeed_kph": "4.828032", "winDir":
> "319.0", "windGust_kph": "25.749504", "windGustDir": "169.0", "rain_cm":
> "0.0", "rainRate_mm_per_hour": "0.0", "beaufort_count": "1.0",
> "maxSolarRad_Wpm2": "822.1835611108015", "hourRain_cm": "0.0", "rain24_cm"
> : "0.06", "dayRain_mm": "0.0", "usUnits": "16.0"}
>
>
> The Belchertown skin is not altering the MQTT message, so I made this
> change to the weewx.conf file to display the correct unit:
>
> # Various options for customizing your reports.
>
> [[Defaults]]
> [[[Units]]]
> [[[[Groups]]]]
> group_speed = km_per_hour # Options are
> 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second'
>
> If you need another MQTT need to send it.
>
>
>
> On Sunday, June 28, 2020 at 11:51:02 AM UTC+2, Maarten van der Hoeven
> wrote:
>>
>> Driver updated, data is okay now!
>>
>> Also running MQTT and bechertown: I see windspeed reported as km/h,
>> although I've set the unit to m/s in weewx.conf
>>
>> Yes, tx_id 3 is an extra temp sensor. I've got the ISS on ID=2, and the
>> temp sensor on ID=3
>>
>> Op zondag 28 juni 2020 om 11:48:59 UTC+2 schreef Bastiaan Meelberg:
>>
>>> Very helpful Maarten! Thank you.
>>>
>>> The temp with tx_id 3 that is an 'extra' temp sensor?
>>>
>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-development" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-development/a0c096fe-c8f2-4614-bde9-7df362ecb999o%40googlegroups.com.
