So, that's what you've been doing with yourself! Looks good. And, timely. I've also been on the lookout for a new station, and the GW1000 is at the top of the list.
On Mon, Jul 20, 2020 at 7:50 PM gjr80 <[email protected]> wrote: > I have developed an API based driver for the Ecowitt GW1000 WiFi Gateway. > So what? Well the current means of receiving data from the GW1000 involves > the GW1000 pushing data that is then parsed/processed by the interceptor > driver and loop packets emitted. This API based driver uses a pull > methodology where the GW1000 API is polled at a user specified interval and > the API response is then used to generate loop packets. Use of the API also > gives access to sensor battery data and allows some interrogation of the > GW1000/sensor state. > > I have developed the driver without direct access to the API so I am sure > there will be some issues with it, most likely to do with device/sensor > state info and possibly sensors I don't have access to. I have tested it > against GW1000/WH31/WH32/WH41/WH51/WH57 sensors. The driver can be operated > as a traditional WeeWX driver that emits loop packets but can also be > operated as a WeeWX service that augments loop packets with GW1000 data. > The driver will operate under WeeWX 4.x python 2 and 3 and under WeeWX > 3.9.x (probably some earlier 3.x versions as well). > > The driver can be found on GitHub <https://github.com/gjr80/weewx-gw1000> > and can be downloaded as an extension package from the releases tab > <https://github.com/gjr80/weewx-gw1000/releases>. Installation and > configuration is covered in the readme on the GitHub site or as included in > the package as well as in the up front comments in the driver file > gw1000.py. The driver can be run directly without the overheads of a > running instance of WeeWX (WeeWX must be installed though). You can also > run the driver directly while WeeWX continues to operate without > interfering with the running WeeWX instance. > > I would welcome anyone who wants to try the driver. If you do want to try > it I would recommend installing the driver extension package or just the > driver file (gw1000.py), and then running the driver directly with the > various command line options (I would not reconfigure WeeWX to use the > driver until you have confirmed it configured and operating as expected). > Once gw1000.py is in the user directory (/home/weewx/bin/user or > /usr/share/weewx/user) you can run the driver directly by using: > > $ PYTHONPATH=/home/weewx/bin python -m user.gw1000 > > or > > $ python -m user.gw1000 > > depending on your WeeWX install. This should display the driver help. > Depending on what python version(s) are installed on your system, and how > your system is configured, you may need/want to change python to python2 or > python3 in the above commands. > > I would recommend exercising the various command line options before > building up to --test-driver or --test-service. Only once you see the > data you expect should you move to reconfiguring WeeWX to use the > driver/service. If some sensor data is missing or just plain wrong then > that needs to be dealt with. > > If you do run into problems, in particular if the driver is not returning > expected data, run the driver with the --debug=3 command line option and > post details of the problem and a log extract showing the driver debug info. > > Gary > > -- > You received this message because you are subscribed to the Google Groups > "weewx-development" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-development/d7337d80-1964-4698-801c-540a4ae31fa6n%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-development/d7337d80-1964-4698-801c-540a4ae31fa6n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-development" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-development/CAPq0zEBp3Tqy5vS9VU6B_2NeUdwGcn-ZJKeR5Wpuv%2BCQBsZsgA%40mail.gmail.com.
