Hi, Yes I have tried the Interceptor before, but I didn't get any data. I guess that somehow this should work, as I now found a side, were users have included the station in FHEM (which is a home automatisation bridge- software or something) without any problems. Not with the interceptor, but with a similar methode. So the "sniffing" should work. In my last attempt I was not able to sniff on the right IP address and also I have not the port to sniff at, as I don't know which port the station is using. This FHEM side mentioned port 80 but some users experienced port 8086 - so this is still unclear (I will need a port sniffer to check that, I guess, but I haven't found one right now). Also I have now a new router (fritzbox) - finally. So I will try the whole thing again, as it is now far easier to access the home network. I suddenly realized that the old one was probably causing a lot of problems I had with my network. So maybe know it would work. In the FHEM forum this guys entered the DNS from the raspberry as URL in the Bresser web-config (e.g.: rasberry.fritz.box) - which they got from the FHEM software - I guess. Which is unclear to me too, but then the station starts to send the data and the rest was easy. So maybe this would also be an idea (not only sniff, also send the data to the raspberry beforehand).
I will try all this and if it doesn't work then I will come back to the group, you mentioned above, to create a help request. THANKS again!!! BR, Steinwolf Bob Atchley schrieb am Montag, 7. Dezember 2020 um 07:32:39 UTC+1: > Hi SteinWolf, > > I have not used either so I won't be able to help you, but I believe you > have 2 choices to get your WiFi version working with weewx: > > 1) The interceptor > 2) SDR > > The first is better as you will also get pressure and indoor temperature > and humidity > https://github.com/matthewwall/weewx-interceptor > > However the SDR method should also work: > https://github.com/matthewwall/weewx-sdr > > If you post a help request in the main weewx user forum you should get help > https://groups.google.com/g/weewx-user > > Regards > > Bob > > On Sunday, 6 December 2020 at 23:40:50 UTC SteinWolf wrote: > >> Hey Bob. >> Sorry for my late repost. Its due to some circumstance, that I wasn't >> able to write earlier. >> However, what should I say... This whole thing is, and as far as I know >> now always was, doomed to failure. >> The name of the station has a "P" at the end, but not a "PC" - and >> therefore there is no usable usb port on it. *I have the Wifi version*. >> So I guess there is now way to get the data from the station (except maybe >> the weewx interceptor sniffer - but I couldnt find anything about, nor >> anyone on google who gets this to work). >> So I''m stuck now with this station but I still hope, that in the future >> someone manages to get this connection up and running. >> My apologies that I wasted your time. >> BR, >> Steinwolf >> >> Bob Atchley schrieb am Montag, 17. August 2020 um 07:10:56 UTC+2: >> >>> ValueError: Device not found >>> >>> >>> This means that the ws6in1 driver was unable to establish a connection >>> to the weather station. >>> Check that the usb cable is connected properly, possibly replace it with >>> another cable >>> >>> Nearly there ... >>> >>> Bob >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-development" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-development/0c559f23-7acc-4528-bdff-415d530c5485n%40googlegroups.com.
