Thanks Gary.an I installed the template. Big improvement with 10 min gust and max wind gust. Slight issue with the location where they are displayed on the chart. The max gust and max average wind speed values appear transposed on the graph.
On Wednesday, August 17, 2016 at 3:15:20 AM UTC-4, gjr80 wrote: > > Ok, there is a subtle bug in the gauge-data.txt.tmpl template; a variable > and a tag both have the same name which was causing problems when the name > was used for the 2nd time (which happened to be the tags for wind and gust > speeds). The quick fix is to replace your current gauge-data.txt.tmpl > with the attached version (out of interest the only change is from lines > 278 to 281 incl). To do this: > > 1. Rename your existing gauge-data.txt.tmpl to gauge-data_orig.txt.tmpl > (this way we can revert to the old version is there is a problem later) . > 2. Download/copy the attached gauge-data.txt.tmpl in its place. > 3. Observe the weewx logs and after the next report cylce is complete > check your gauges page, the -9999 (or other obviously wrong) value should > be gone. You can also look at your gauge-data.txt file (the generated > data) and there should be numeric values against the wspeed and wgustTM > field (you can easily look at your gauge-data.txt file in your browser > by appending /gauge-data.txt after /ss in the address bar when vieing > your gauges page in your browser eg http://address/ss/gauge-date.txt). > 4. If the error persists, or something else goes wrong with the > gauges, just delete the new gauge-data.txt.tmpl and rename > gauge-data_orig.txt.tmpl to gauge-data.txt.tmpl and things should be > back the way they were after the next report cycle. If this happens post > back here some details of the issue/error message. > > You may see an error in the logs if you time the changeover of files just > as the reports are run, it's nothing to be concerned about though if you > want to avoid it stop weewx before replacing gauge-data.txt.tmpl and then > start it again after changeover is complete. > > > In tracking this down I have noticed a couple of other issues with the > template, I'll look into these and get a change sent to the maintainer of > the steel series weather gauges shortly. > > > Gary > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
