Hi, my files are all in totally different locations.
On Saturday, 10 September 2016 18:21:45 UTC+1, mwall wrote: > > On Saturday, September 10, 2016 at 12:53:50 PM UTC-4, Andy Harrold wrote: >> >> Directly into the Pi USB port >>> >>> >>> > andy, > > please try with the station plugged in to a powered usb hub. the usb on > rpi is notoriously flaky. > > it is possible that the timeout is due to the usb not being ready, but to > determine whether that is the case, you must try the steps below. > > this is the procedure for diagnosing te923 problems. there is no reason > to try step 2 unless step 1 works, and so on. they should be repeatable - > you should be able to do step 1 five times in a row, and it should work > every time. > > as you run the commands, monitor the log, e.g., > > sudo tail -f /var/log/syslog > > 0) be sure the device is attached > > lsusb > Bus 002 Device 005: ID 1130:6801 Tenx Technology, Inc. > > 1) run the driver directly to get current readings, as root: > > cd /home/weewx > PYTHONPATH=bin python bin/weewx/drivers/te923.py --readings > > 2) run the driver directly to get historical records, as root: > > cd /home/weewx > PYTHONPATH=bin python bin/weewx/drivers/te923.py --records=5 > > 3) run weewx directly > > cd /home/weewx > sudo bin/weewxd weewx.conf > > m > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
