Hallo,
Thanks for your tips. In fact, substituting the later drivers did not work
at all. Weewx failed to read the data regardless of my efforts.The original
and other windows software still worked with the station, so I concluded
that I had miraculously destroyed something in the raspi configuration. I
was beginning to despair when I noticed your new weewx version. I installed
this, changed over my skins, alarm file and the schema (my original
intention with this post) from before the crash and am delighted to report
that so far the system is running smoothly. MANY THANKS FOR THIS.
Am Sonntag, 21. August 2016 10:31:30 UTC+2 schrieb GBW:
>
> hallo,
>
> As beginner, I am running weewx on a raspi 3 (setup.py) connected to a
> german TFA Nexus (TE923 clone). Weewx is running fine apart from ocassional
> crashes (a different issue) and I am able to configure the templates to get
> as much data as possible using the standard driver but suspect some may be
> missing. I am trying to correlate the raw data from the Nexus, the database
> weewx.sdb and this message that was printed out using the standard alarm.py
> file:
>
>
> Record:
>
> {'heatindex': 61.76571428571423, 'altimeter': 30.124462235072006,
> 'outHumidity': 77.0, 'ET': None, 'maxSolarRad': None, 'link_rain': 0.0,
> 'uvBatteryStatus': 1.0, 'interval': 20, 'link_uv': 1.0,
> 'rainBatteryStatus': 1.0, 'uvLinkStatus': None, 'outLinkStatus': None,
> 'rainRate': 0.0, 'outTempBatteryStatus': 1.0, 'forecast': 6.0,
> 'extraLinkStatus1': None, 'extraLinkStatus2': None, 'extraLinkStatus3':
> None, 'extraLinkStatus4': None, 'inTemp': 74.00571428571429, 'storm': 0.0,
> 'inDewpoint': 61.276098375690395, 'barometer': 30.16245112929988,
> 'windchill': None, 'dewpoint': 54.476171656787166, 'windrun': 0.0,
> 'extraBatteryStatus2': 1.0, 'rain': 0.0, 'humidex': 66.2961129592404,
> 'pressure': 27.508388767307753, 'extraHumid4': None, 'extraHumid3': None,
> 'rainLinkStatus': None, 'extraHumid1': 61.0, 'rainTotal':
> 0.06578000000000007, 'extraTemp4': None, 'extraTemp2': None, 'extraTemp3':
> None, 'usUnits': 1, 'extraTemp1': 74.47999999999995, 'link_wind': 1.0,
> 'windLinkStatus': None, 'appTemp': None, 'extraBatteryStatus3': 1.0,
> 'windBatteryStatus': 1.0, 'UV': None, 'extraBatteryStatus4': 1.0,
> 'dateTime': 1471761600.0, 'windDir': None, 'outTemp': 61.76571428571423,
> 'windSpeed': None, 'inHumidity': 64.53968253968254, 'windGust': None,
> 'link_3': 1.0, 'link_2': 0.0, 'link_1': 0.0, 'windGustDir': None,
> 'extraBatteryStatus1': 1.0, 'cloudbase': 4159.995077547059, 'link_5':
> 1.0, 'link_4': 1.0}
>
>
> This appears to be what is called "rec" in the script and to be a python
> dictionary. I notice that there are data fields that are not identified in
> either the buffer output or the database, for example those marked in red:
> forecast, inDewpoint, humidex, cloudbase.
>
>
> Are these fields actually calculated by the weewx software? Can I change
> the database to accept these data if they could be read in? I should be
> grateful for any tips, many thanks
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
