Hello m, Good news. v3.6.0 is working fine on the Raspberry after reinstalling Raspbian. It's been running for over 12 hours without any error so far. Therefore, it can be infer that Errno110 was hw related (laptop usb ports) or an Ubuntu 16.04 issue on this laptop. I have tested the usb ports on a pendrive and a smartphone and they seem to work ok. I will test some more devices to try to sort it out.
Thank you, On Monday, October 10, 2016 at 8:00:05 PM UTC+2, Miguel Iniesta wrote: > > Hello, > Same error. > I have been running v3.5.0 on a raspberry connected to the wmr300 for over > a month. After some crashes and a failed upgrade, the raspberry it is not > working fine. At every restart it returns to a point in time some months > earlier. Changes after that date are lost. Very strange. > So I decided to install v3.6.0 on a laptop running Ubuntu 16.04. The > errors reported come from this hardware. > Since it doesn't work, I am going to try to fix the Raspberry reinstalling > the OS and test v3.6.0 on it. > I will let you know. > > Thank you very much for your support. > > > > > On Sunday, October 9, 2016 at 11:37:06 PM UTC+2, mwall wrote: >> >> miguel, >> >> did you have the wmr300 station working with a previous version of weewx, >> or on different hardware? or is this your first time to use the wmr300 >> with weewx? >> >> please change line 986 in wmr300.py v0.13rc1 from this: >> >> self.timeout = 100 >> >> to this: >> >> self.timeout = 3000 >> >> then try running weewx again. >> >> m >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
