I will change it to that when I get home from work and see if that works. Thanks Andrew.
On Oct 11, 2016 06:51, "Andrew Milner" <andrew.s.r.mil...@gmail.com> wrote: > From the hardware guide pressure is hardware for your station and > barometer and altimeter are software derived > > So to calibrate you need > [StdCalibrate] > [[calibrations]] > pressure = pressure + 1.28 > > and in StdWxCalculate > [StdWxCalculate] > [[calculations]] > pressure = hardware > barometer = either prefer_hardware or software > altimeter = either prefer_hardware or software > > should do the trick I think > > > > On Tuesday, 11 October 2016 14:33:38 UTC+3, Double J Entertainment wrote: > >> I have a acurite 01036 it should have been 30.23 inhg at the time I did >> the change. >> >> On Oct 11, 2016 05:54, "Andrew Milner" <andrew.s...@gmail.com> wrote: >> >>> One of them must come from hardware!! Check the user guide for your >>> station type and it will tell you which comes from hardware and which have >>> to be derived in software. >>> >>> Then use the calibrate to add/subtract whatever you need (in the units >>> of your database) >>> >>> What is your station type? What SHOULD the barometric pressure have >>> been (if 28.95 was incorrect)? >>> >>> >>> >>> On Tuesday, 11 October 2016 13:42:41 UTC+3, Double J Entertainment wrote: >>> >>>> On weatherunderground I was getting 28.95 so I set the StdCalibrate to >>>> software for pressure barometer and altimeter now on all the places I >>>> upload data I am getting a -- or no pressure or no pressure readings at >>>> all. I assume I need to set them back to prefered hardware. But what do I >>>> do to callibrate the pressure. That was why I changed them to software I >>>> was thinking the software would adjust it. >>> >>> -- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "weewx-user" group. >>> To unsubscribe from this topic, visit https://groups.google.com/d/to >>> pic/weewx-user/o6zVfIYpoMc/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> weewx-user+...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >>> >> -- > You received this message because you are subscribed to a topic in the > Google Groups "weewx-user" group. > To unsubscribe from this topic, visit https://groups.google.com/d/ > topic/weewx-user/o6zVfIYpoMc/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > weewx-user+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.