On Saturday, October 15, 2016 at 3:48:04 PM UTC-4, W.C. Hast wrote: > > Folks, > I have a Acurite 5 in one model 02064 running at my home. It has been > doing just fine until I did a upgrade to the latest version of WeeWx, > previously > I was about 2 revs back. >
which version were you running before, and which version are you running now? > When we get higher wind gust the whole sensor system seems to go out except > for the rain sensor and inside temp sensor, but the rain sensor may go > out, it just > appears to be more robust. > > Here are two images of the WeeWx screens, notice that the fields for all > but rain > and inside temp are N/A > the log snippet you posted shows that the console lost contact with the sensors. when this happens, weewx logs it but does not update the data, because it has no valid data from the sensors. the console, on the other hand, displays the data from the last time it heard from the sensors. this behavior should be independent of wind speed or any other value. what happens when you spin the cups for awhile, for example with an air compressor? do you see the stale data message whenever the wind speed exceeds some threshold? are you sampling the rf signals from the sensors? what do you see from your rf sampling when you see the stale data messages in the log? m -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
