Thank you, it turned out that the console needed to be reset, I found it when I changed channels realized that I had done so switched back to the correct channel and saw the signal level go way up. Not sure if the receiver had drif- ted or what but as soon as I did that, it was good. No more lost and low signal issues.
Oh yes, I was monitoring the TX signal, I have a Icom HT that I put on channel and listened to the signal it was nice and strong, but with the console off freq. it just was not hearing it well. I am using a RPi3 and I see that it appears that WeeWx does not take full advantage of the 4 processor cores, but that is another issue. On Sun, Oct 23, 2016 at 8:29 PM, mwall <[email protected]> wrote: > On Saturday, October 15, 2016 at 3:48:04 PM UTC-4, W.C. Hast wrote: >> >> Folks, >> I have a Acurite 5 in one model 02064 running at my home. It has been >> doing just fine until I did a upgrade to the latest version of WeeWx, >> previously >> I was about 2 revs back. >> > > which version were you running before, and which version are you running > now? > > > >> When we get higher wind gust the whole sensor system seems to go out >> except >> for the rain sensor and inside temp sensor, but the rain sensor may go >> out, it just >> appears to be more robust. >> >> Here are two images of the WeeWx screens, notice that the fields for all >> but rain >> and inside temp are N/A >> > > > the log snippet you posted shows that the console lost contact with the > sensors. when this happens, weewx logs it but does not update the data, > because it has no valid data from the sensors. the console, on the other > hand, displays the data from the last time it heard from the sensors. > > this behavior should be independent of wind speed or any other value. > > what happens when you spin the cups for awhile, for example with an air > compressor? do you see the stale data message whenever the wind speed > exceeds some threshold? > > are you sampling the rf signals from the sensors? what do you see from > your rf sampling when you see the stale data messages in the log? > > m > > -- > You received this message because you are subscribed to a topic in the > Google Groups "weewx-user" group. > To unsubscribe from this topic, visit https://groups.google.com/d/ > topic/weewx-user/sBVhfMyDe2U/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Chuck Hast -- KP4DJT -- Glass, five thousand years of history and getting better. The only container material that the USDA gives blanket approval on. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
